MCP625T-E/UN

Voltage - Input Offset:	200µV
Base Part Number:	MCP625
Supplier Device Package:	10-MSOP
Package / Case:	10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Voltage - Supply, Single/Dual (±):	2.5 V ~ 5.5 V
Current - Output / Channel:	70mA
Current - Supply:	2.5mA
Series:	mCal Technology
Current - Input Bias:	5pA
Gain Bandwidth Product:	20MHz
Slew Rate:	10 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	2
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to MCP625T-E/UN

The MCP625T-E/UN is a general-purpose operational amplifier (op-amp) and buffer amplifier. It is typically used in instrumentation, linear applications and buffer-amplification. Operational amplifiers (op-amps) are fundamental building blocks of analog electronic circuits, as they are capable of performing mathematical operations such as addition, subtraction, integration and differentiation on input voltages. Buffer amplifiers can be used to isolate circuits from each other.

MCP625T-E/UN Application Field

The MCP625T-E/UN is designed for use in instrumentation, linear applications, and bufferamplification. In instrumentation, the device can be used to provide gain in a variety of analog applications, such as signal conditioning, instrument precision and power supply. As a linear amplifier, the MCP625T-E/UN can be used to amplify or reduce audio signals or any other low level voltage signals. As a buffer amplifier, the MCP625T-E/UN can be used to isolate, or “buffer,” circuits from each other, often providing an isolation barrier to protect both circuits.

MCP625T-E/UN Working Principle

The MCP625T-E/UN is an operational amplifier and buffer amplifier based on the classic “difference amplifier” design. In this design, two inputs are connected in parallel, and the amplifier circuit is set up to sense the difference in voltage between them. The amplifier then amplifies this difference and outputs a voltage that is proportional to the input. This circuit can be used for a variety of applications, such as scalar amplifiers, precision active filters, sum-to-difference amplifiers, active input stages for analog-to-digital converters, and more.The MCP625T-E/UN can also be used as a buffer amplifier, which is an amplifier that is designed to isolate two circuits from each other. A buffer amplifier is typically used to isolate a high-impedance circuit from a low-impedance circuit. This buffer amplifier amplifies the output of the circuit and feeds it into the low-impedance input without introducing any extra noise or distortion, thus protecting the low-impedance circuit.

Conclusion

The MCP625T-E/UN is a versatile operational amplifier and buffer amplifier. It is typically used in instrumentation, linear applications, and buffer-amplification. In instrumentation, the device can be used to add gain to analog signals, while in linear applications it can be used to amplify or reduce audio signals or any other low level voltage signals. As a buffer amplifier, the MCP625T-E/UN can be used to isolate circuits from each other, providing a protective layer to prevent noise or distortion from entering a circuit. The device is based on the classic “difference amplifier” design and can be used for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description