MCP6482T-E/MS

Voltage - Input Offset:	1.5mV
Base Part Number:	MCP6482
Supplier Device Package:	8-MSOP
Package / Case:	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Voltage - Supply, Single/Dual (±):	2.2 V ~ 5.5 V, ±1.1 V ~ 2.75 V
Current - Output / Channel:	12mA
Current - Supply:	240µA
Series:	--
Current - Input Bias:	1pA
Gain Bandwidth Product:	4MHz
Slew Rate:	2.7 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	2
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MCP6482T-E/MS Application Field and Working PrincipleThe MCP6482T-E/MS is a high-performance, low-power CMOS operational amplifier. Developed by Microchip Technology, this amplifier is optimized for portable medical systems and other precision instrument applications. It is highly integrated, making it ideal for emerging medical applications as well as ultrasonic, optical, and thermal sensors.The MCP6482T-E/MS provides a high level of accuracy and high common-mode rejection ratio (CMRR) for applications that require high performance. It offers low power consumption with its low quiescent current (20uA) and wide operating voltage range (1.8V-4V). Furthermore, the MCP6482T-E/MS is designed for industrial and medical applications with its tight temperature coefficient (25 ppm/C) and high bandwidth (2.5MHz). The amplifier also has low distortion and offers excellent differential gain/phase distortion of 0.01%. The MCP6482T-E/MS\'s wide range of applications includes medical instrumentation, antenna receivers, ultrasound systems, and ultrasound imaging. It is also suitable for data acquisition systems and optical sensors. Additionally, the amplifier is suitable for use in industrial applications such as vibration sensors and accelerometers, as well as for nonlinearity correction applications with its low gain variations.The MCP6482T-E/MS\'s fundamental working principle is based on feedback. Op-amps act like voltage followers, amplifying the voltage difference between the input and output of the device. This amplified signal is then fed back to the inverting input, allowing the amplifier to compare the input and output voltages. The output voltage is then adjusted to match the input voltage, thus providing a constant input/output relationship.The MCP6482T-E/MS can be used in a variety of linear amplifiers, such as instrumentation, OP amps, and buffer amps. In instrumentation amplifiers, the MCP6482T-E/MS is used to measure the amplitude and frequency of an input signal. In OP amps, the MCP6482T-E/MS can be used to amplify small signals (e.g. from sensors) to a level that can be processed electronically. Finally, in buffer amps, the MCP6482T-E/MS is used as an interface between different circuits to ensure low signal distortion. In addition to its wide range of applications, the MCP6482T-E/MS also offers low noise, excellent dielectric isolation, and industrial grade components. All of these features make the MCP6482T-E/MS an ideal component for many different applications. With its high performance and long-term stability, it is an excellent choice for use in any system that relies on low power, high accuracy, and low distortion.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description