MCP6547-E/P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MCP6547-E/P device is a cost-effective and easy-to-use linear-comparator integrated circuit. It is mainly used to detect and compare both analog and digital signals. This linear-comparator is commonly used in automotive, industrial, and consumer applications such as motion control, voltage regulation, and motor speed control.

The device has two power pins: VSS (Ground) and VDD (+ Input voltage). There is one input pin and one output pin. The input pin (VIN+) is used to detect incoming signals, while the output pin (VOUT) is used to detect the comparison results.

When a signal enters into the VIN+ pin, it is compared with the threshold value set by the external resistor on the VREF pin (Reference Voltage). If the input signal is greater than the threshold value, then the circuit sends a high signal to the VOUT pin. Conversely, if the input signal is lower than the threshold value, then the circuit sends a low signal to the VOUT pin.

The MCP6547-E/P can also be used in longer-term applications as it has an ultra-low power consumption of 160 µA. This allows it to extend the power levels when a single comparator is used, or multiple devices are used in a multi-level configuration. This is useful for applications where the comparator needs to remain active for a long period of time.

The MCP6547-E/P can also be configured as an open collector device, which allows it to be used in multiple signal output applications. This is because the output signals can be inverted, enabling the signal to be read from multiple devices in one network.

The MCP6547-E/P has a maximum voltage tolerance of 10V, making it suitable for automotive and industrial applications. It also has a low input current of 2 mA and an output current of 7 mA, making it suitable for a wide range of applications. The device has a high-speed data transfer rate of 500ns, making it suitable for fast response time.

Finally, the MCP6547-E/P is a comparator that is highly configurable to match the needs of various applications. It is a cost-effective integrated circuit with high performance and low power consumption. Therefore, it is a great choice for various applications, including motion control, voltage regulation, and motor speed control.

The specific data is subject to PDF, and the above content is for reference