MCR218-006

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A thyristor or silicon-controlled rectifier (SCR) is a semiconductor device consisting of three terminals: the anode, the cathode and the gate. It is commonly used in power control applications such as motor speed control, lighting and heating control, and static relays. The MCR218-006 is a special kind of thyristor.

The MCR218-006 is a 600V silicon controlled rectifier specifically designed for high power applications. It features a low on-state voltage drop, low forward operating current, and high operating temperature. It is available in a compact TO-220 package and is suitable for use in a wide variety of applications, including motor control, switching power supplies, lighting control, and LED lighting. The key feature of this SCR is its fast recovery time, allowing it to switch off quickly after being triggered.

The working principle of the MCR218-006 is based on the use of a gate control voltage to switch the SCR on and off. When the SCR is in the off state, the gate current must be zero and the anode-to-cathode voltage must be less than the on-state threshold. When a gate voltage is increased to the on-state threshold and maintained, the SCR will latch in the on state, until a negative gate current is applied to de-latch the SCR.

The MCR218-006 offers a wide range of applications. It is used in motor control applications to reduce motor start-up time, prevent over-voltages, and improve efficiency of the drive system. It is also used in lighting and heating control applications where fast switching is a key requirement. In both cases, the SCR can be used to switch a load on and off at predetermined times and for predetermined lengths of time.

The MCR218-006 is also used in static relays, where it is used to open and close contacts, typically in response to a low power signal. The advantage of using an SCR in such applications is that it can provide higher reliablity and longer life compared to electromechanical relays. Additionally, it can be used to protect other electrical components, such as transformers and motors, from over-currents and short circuits.

In conclusion, the MCR218-006 is a versatile and reliable silicon controlled rectifier that is suitable for use in many power control applications. With its fast recovery time and low on-state resistance, it can be used to switch loads on and off, reduce motor start-up time, improve electrical system efficiency, and protect other components from over-currents and short circuits.

The specific data is subject to PDF, and the above content is for reference