MCR22-6RLRPG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs

MCR22-6RLRPG is a member of the family of silicon controlled rectifier (SCR) thyristors. SCRs allow for a small current to control a larger output current, allowing for current-sensing rather than voltage-sensing of the output current. They are used in a wide variety of applications from switching high voltage power sources to voltage regulation and motor speed control.

An SCR is made up of a four-layer p-n-p-n junction semiconductor element. When a small charge is applied to the gate terminal, it causes a forward bias in the gate junction, allowing current to flow from the anode to the cathode. This is known as the "on" state. When the gate voltage source is removed, the SCR remains in its "on" state until the anode-cathode current is reduced below the holding current. This is called the "off" state.

The MCR22-6RLRPG is a dual channel SCR that is rated for up to 400V, 6A and 85W. It has a dynamic resistance of 0.155 ohms and a short circuit current of 5.4A. It is well-suited for high voltage and current applications such as motor speed control, switching power supplies and HVAC systems.

SCRs are typically used in slightly different shapes and sizes, depending on the application. For instance, larger SCRs are used to switch higher-voltage circuits, while smaller SCRs are used for low-voltage switching. The particular size and shape of the MCR22-6RLRPG is dependent on the application; however, a common configuration is the "bulk" package, which features leadless terminals that can be soldered onto a printed circuit board (PCB) for easy installation.

The MCR22-6RLRPG can also be used for energy and current regulation, as well as motor speed control. The circuitry and components used for these applications can vary drastically, but the underlying principle remains the same: a small amount of current is used to control a larger amount of current. For example, an SCR can be used to slowly increase the resistance in an electric motor as the speed increases, providing an easy way to regulate the motor\'s speed.

SCRs are also commonly used in applications that require long-term switching, such as hot-wire foam cutting machines and Inverter welders. Generally, a heat sink is used with SCRs, as the large currents flowing through the SCR produce a significant amount of heat. This heat can damage the SCR, so a heat sink helps to dissipate it, ensuring the SCR\'s long-term reliability.

The MCR22-6RLRPG is a reliable and powerful SCR suitable for a variety of applications. Its rugged construction and wide voltage rating make it well-suited for controlling high currents. Its ability to make efficient and reliable current-sensing allows for easier and more accurate motor speed control. And its leadless terminals make for fast and convenient installation.

The specific data is subject to PDF, and the above content is for reference