Allicdata Part #: | MCR708A1GOS-ND |
Manufacturer Part#: |
MCR708A1G |
Price: | $ 0.54 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Littelfuse Inc. |
Short Description: | THYRISTOR SCR 4A 600V IPAK |
More Detail: | SCR 600V 4A Sensitive Gate Through Hole I-PAK |
DataSheet: | MCR708A1G Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 0.48510 |
10 +: | $ 0.42651 |
25 +: | $ 0.37750 |
100 +: | $ 0.32880 |
250 +: | $ 0.28617 |
500 +: | $ 0.24356 |
1000 +: | $ 0.19485 |
2500 +: | $ 0.17658 |
5000 +: | $ 0.16441 |
Current - Hold (Ih) (Max): | 5mA |
Base Part Number: | MCR708A |
Supplier Device Package: | I-PAK |
Package / Case: | TO-251-3 Short Leads, IPak, TO-251AA |
Mounting Type: | Through Hole |
Operating Temperature: | -40°C ~ 110°C |
SCR Type: | Sensitive Gate |
Current - Non Rep. Surge 50, 60Hz (Itsm): | 25A @ 60Hz |
Current - Off State (Max): | 10µA |
Series: | -- |
Current - On State (It (RMS)) (Max): | 4A |
Current - On State (It (AV)) (Max): | 1.6A |
Voltage - On State (Vtm) (Max): | 2.2V |
Current - Gate Trigger (Igt) (Max): | 75µA |
Voltage - Gate Trigger (Vgt) (Max): | 800mV |
Voltage - Off State: | 600V |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Thyristors are semiconductor devices that allow control of electric current in an electrical circuit. The most commonly used type of thyristor is the Silicon Controlled Rectifier (SCR). The SCR is capable of controlling large currents with a small control signal, making it a useful component for controlling electrical equipment. In this article, we will take a look at the MCR708A1G and discuss its application field and working principle.
MCR708A1G Application Field
The MCR708A1G is a 800V SCR that is designed for high-current applications such as power control devices for resistive and inductive loads. This SCR has a wide range of control voltages and frequencies, making it suitable for a variety of applications. Its power surge capability makes it an ideal choice for surge protection, switching, and other high-current applications.
MCR708A1G Working Principle
The working principle of the MCR708A1G is quite simple. It works by switching the current flow through the primary circuit on or off when a signal is applied or removed from the gate. When the signal is removed, the SCR stops conducting until the current drops below a certain level. This is known as a latching action, as once the signal is removed, the current remains off until it is manually reset.
To understand how the MCR708A1G works, it is important to understand the various components that make up the device. At the heart of the MCR708A1G is the anode, cathode, and gate. The anode is the positive terminal, with the cathode being the negative terminal. When a signal is applied to the gate, it causes a current flow from the anode to the cathode, allowing current to flow through the device. When the signal is removed, the current is cut off, and the current flow remains cut off until the signal is manually reset.
The MCR708A1G also has two additional components, the gate resistor and the gate capacitor. The gate resistor is used to limit the amount of current that can pass through the gate, while the gate capacitor is used to ensure that the gate has enough charge in it for the gate to switch on or off properly. By using these components, the MCR708A1G is able to control current in an efficient and reliable manner.
Conclusion
The MCR708A1G is a powerful SCR that is suitable for a wide range of applications. Its easy control, high power surge capability, and wide range of control voltages and frequencies make it an ideal choice for high-current applications. With its simple working principle, the MCR708A1G can easily be used in a variety of situations.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MCR718T4 | ON Semicondu... | 0.0 $ | 1000 | THYRISTOR SCR 4A 600V DPA... |
MCR708AT4 | ON Semicondu... | 0.0 $ | 1000 | THYRISTOR SCR 4A 600V DPA... |
MCR716T4 | ON Semicondu... | 0.0 $ | 1000 | THYRISTOR SCR 4A 400V DPA... |
MCR708A1 | ON Semicondu... | 0.0 $ | 1000 | THYRISTOR SCR 4A 600V IPA... |
MCR72-6T | ON Semicondu... | 0.0 $ | 1000 | THYRISTOR SCR 8A 400V TO2... |
MCR72-6TG | Littelfuse I... | 0.76 $ | 1000 | THYRISTOR SCR 8A 400V TO2... |
MCR706AT4G | Littelfuse I... | 0.21 $ | 1000 | THYRISTOR SCR 4A 400V DPA... |
MCR703AT4G | Littelfuse I... | -- | 1000 | THYRISTOR SCR 4A 100V DPA... |
MCR708AT4G | Littelfuse I... | 0.21 $ | 1000 | THYRISTOR SCR 4A 600V DPA... |
MCR716T4G | Littelfuse I... | -- | 1000 | THYRISTOR SCR 4A 400V DPA... |
MCR708A1G | Littelfuse I... | 0.54 $ | 1000 | THYRISTOR SCR 4A 600V IPA... |
MCR718T4G | Littelfuse I... | -- | 1000 | THYRISTOR SCR 4A 600V DPA... |
MCR708AG | Littelfuse I... | 0.54 $ | 407 | THYRISTOR SCR 4A 600V DPA... |
MCR72-3G | Littelfuse I... | -- | 695 | THYRISTOR SCR 8A 100V TO-... |
MCR72-6G | Littelfuse I... | 0.87 $ | 888 | THYRISTOR SCR 8A 400V TO2... |
MCR72-8TG | Littelfuse I... | 0.87 $ | 277 | THYRISTOR SCR 8A 600V TO2... |
MCR72-8G | Littelfuse I... | 0.89 $ | 1000 | THYRISTOR SCR 8A 600V TO2... |
THYRISTOR 600V 12A TO220SCR 600V 18.8A S...
NCR100W-10L/SC-73/REEL 7" Q1/TSCR 850V 1...
SCR SENS 800V 800MA TO92-3SCR 800V 800mA...
THYRISTOR 200V 0.8A SOT54SCR 200V 800mA ...
THYRISTOR 600V 8A TO220SCR 600V 12.6A St...
THYRISTOR 600V 6A TO220SCR 600V 9.4A Sta...