MCR716T4G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors, also known as silicon-controlled rectifiers (SCRs), are a class of four-layer, three-terminal semiconductor devices. When a voltage is applied between the anode and the gate terminals, the thyristor switches from its nonconducting, or off, state to its conducting, or on, state. In its on state, the Anode to Cathode path carries the conducting current, forming an electrical conduction path. The MCR716T4G is a SCR (silicon controlled rectifier) used in many different applications.

The MCR716T4G is a two-terminal, four-layer thyristor which operates in two modes: forward blocking and forward conducting. In forward blocking mode, the current between the gate and anode is blocked from passing through to the cathode. In forward conducting mode, the current can flow from the anode to the cathode, allowing the device to act as a switch. The MCR716T4G is designed to be able to operate in either mode, allowing it to be used in multiple different applications.

The MCR716T4G is most commonly used in applications requiring direct current (DC) power control. Its forward conducting mode is used to turn on and off electrical loads such as motors, switches, and lights, while its reverse blocking mode is used to protect against short circuits and excessive current draw. It is often used in electronic circuits as an isolated switch, allowing for the control of both high and low voltage loads. It is also used in automotive applications such as dimming headlights, windshield wipers, and window lifts, as well as in industrial applications such as controlling hoists, pumps, and conveyor belts. The MCR716T4G can be used in systems needing toggles between AC power, DC power, and ground.

The MCR716T4G is designed to operate with a wide range of input voltages and currents, and its switching frequency range is about 500-1000 Hertz. The device can be triggered directly by either a mechanical switch or an electrical signal. It is designed to operate from a very low voltage range up to 600 Volts, and features a low insulation resistance of 5 M input and 10 M output. It has a turn-off time of 5-6 mseconds and a maximum turn-on time of 1.2 mseconds. It is also designed to be highly reliable, with a mean time before failure (MTBF) of approximately 5 million hours.

The MCR716T4G is a versatile and reliable SCR used in a variety of applications. Its two-terminal, four-layer construction allows it to switch between two different modes easily, making it useful in applications requiring both high and low voltage loads. Its wide input voltage and current range, high insulation resistance, and fast switching time make it suitable for use in a variety of applications ranging from automotive to industrial. Its high reliability and MTBF make it a popular choice for many applications.

The specific data is subject to PDF, and the above content is for reference