MIC2595R-1YM-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power management integrated circuits (PMICs) are electronic components used to manage and optimize power in a system. Hot swap controllers are a type of PMIC used in a wide range of applications to enable the safe insertion or hot swapping of supply voltages. The MIC2595R-1YM-TR hot swap controllers are designed to provide reliable protection against overcurrent and overtemperature conditions in a range of power systems.

The MIC2595R-1YM-TR is a hot swap controller with accurate current and temperature monitoring and protection. It can be used to optimize power and enable safe hot swapping of supply voltages. It features the ability to set current and temperature thresholds, accurate current and temperature monitoring, and protection against overtemperature and overcurrent conditions. The MIC2595R-1YM-TR is typically used in applications such as automotive, medical, industrial, and networking.

The MIC2595R-1YM-TR operates through an power source connected to terminals from the source capable of operating between 4.5V and 16V. The voltage range allowable for the I/O pins is 0V to Vdd minus 0.4V. The MIC2595R-1YM-TR can be considered a linear current-limiting device with overtemperature protection. The device utilizes the Vdd supply which can be varied between 4.5V and 16V while the monitoring voltage of current is set at 0.3V. The PGOOD output is an open-drain output.

The MIC2595R-1YM-TR operates through the following steps: first, the PGOOD status is determined via the programming of the current and temperature thresholds. If the current threshold is exceeded, the internal current limiter is activated. If the temperature threshold is exceeded, the output is disabled in order to protect the device from damaging. After both conditions have been met, the PGOOD status is driven towards the high logic state for supply voltage introduction.

The MIC2595R-1YM-TR features integrated power FETs with the protection circuit. This helps to reduce a system’s power losses by canceling any reverse current flow. The MIC2595R-1YM-TR also features a temperature monitor output, open drain output, and overcurrent limit pin. This enables the device to detect and respond to any overcurrent and overtemperature conditions, as well as to monitor the PGOOD status. In addition, the MIC2595R-1YM-TR has an active boost circuit, with an error detection circuit that provides optimal current limiter accuracy.

The MIC2595R-1YM-TR is a high-accuracy, thermal and current-efficient hot swap controller that is designed to provide reliable protection against current and overtemperature conditions. With its wide range of features, the device can be used in a variety of applications. Its low current consumption and accurate monitoring of current and temperature thresholds make it ideal for use in automotive, medical, industrial, and networking applications, among many others.

The specific data is subject to PDF, and the above content is for reference