MIC2597-2BTSE

PMIC - Hot Swap Controllers

The MIC2597-2BTSE is a hot swap controller which offers several features for improved protection and performance. It is most commonly used to monitor and control the voltage supplied to a device and the current uptake from that device during the hot-swapping process.

The MIC2597-2BTSE is a multifunctional hot swap controller which is capable of providing current, voltage and temperature monitoring and control. It has an internal power-on reset circuit, adjustable delay time and multiple fault system protection, as well as adjustable over-current protection.

The device consists of three power MOSFETs and three selectable bias current source devices. The first MOSFET device serves as the power switch and is used to control the power supply to the device. The remaining two MOSFETs are used to control the current, voltage and temperature of the device. The three bias current source devices are used to provide reference voltage and bias current to the MOSFETs.

The MIC2597-2BTSE also has an internal voltage reference which provides the necessary voltage for the internal protection circuits. The device has an adjustable current limit which is configured via the programmable logic configuration registers. The device has configurable input and output thresholds which can be used to determine the current threshold during hot-swapping operations.

The device also features configurable over-voltage and reverse current protection. The device has a range of safety features, such as over-temperature and over-voltage protection, as well as under-voltage lockout (UVLO) and overtemperature lockout (OTLO). These features help protect the device in the event of an over-voltage or over-temperature fault.

The device offers a wide operating temperature range and is designed to operate efficiently in harsh environments that may contain shock and vibration. The voltage protection range is adjustable and can be configured depending on the application.

The device also has configurable delay times which can be used to configure the power switch timing, control time delay, fault time delay and the over-temperature time delay. This provides an effective way to ensure that the power to the device is not switched off before the application has completed its operations.

The device has an integrated voltage and temperature reference circuit, with which it can provide a highly accurate and stable voltage reference for the protection circuits. It can also detect and report faults on the outputs. The device can be used as a standalone hot swap controller, or it can be used in combination with other protection and control devices.

The MIC2597-2BTSE is an effective and reliable hot swap controller which can be used in applications that require precise control over the current and voltage supply of the device. It is suitable for use in a variety of applications, such as telecom, automotive, industrial, medical and consumer electronics.