MMA6811ALKGCWR2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MMA6811ALKGCWR2 accelerometer is a digital output motion sensing device. It can provide an output voltage that is proportional to acceleration across the three orthogonal axes. The three axes measure acceleration along the x, y, and z planes, respectively. This accelerometer can detect both static acceleration and dynamic acceleration due to changes in orientation and vibration.

It has a wide range of applications. It is typically used to measure accelerations in airplanes, trains, spacecrafts, automotive, and consumer electronics like mobile phones, tablets, and gaming consoles. It is also used in robotics, wearable devices, precise positioning systems, navigation systems, and vibration measurement systems.

The MMA6811ALKGCWR2 is a 3-axis low-power accelerometer with an integrated 12-bit analog-to-digital converter (ADC). It has 16-level programmable measurement ranges configured to measure ±2g, ±4g, and ±8g acceleration. It can measure up to ±4g resolution. The measurement range is adjustable in 1g increments. It operates on a power supply voltage of 2.7V to 5.5V.

The MMA6811ALKGCWR2 features an advanced noise and EMI immune architecture that enables it to operate in harsh environments. The device is highly accurate and stable, with an acceleration resolution of 0.39 mg/LSB and a low noise level of 4 µg/√Hz. It also offers power savings, as it consumes less than 0.6 mW of power for a ±2g range. The device supports a low voltage I2C serial interface.

The MMA6811ALKGCWR2 accelerometer is based on the principle of differential capacitance. It consists of a sensing element made of two interleaved beams suspended on springs. When a force is applied to the device, the displacement of the suspended beam causes a proportional change in the output of the device.

The accelerometer also has an embedded 16-bit processor that converts the electrical signal into digital output. The processor takes differential analog inputs from the sensing element along the three axes, amplifies and filters them, and then combines the signals. The processor then converts the signals into digital outputs that can be read via the I2C interface.

The built-in 16-bit DAC also provides additional signal conditioning such as offset trim, temperature compensation, and full-scale calibration. The DAC also offers SPI and UART interfaces for additional flexibility. The device can be independently configured for each axis using its integrated digital logic.

The MMA6811ALKGCWR2 accelerometer is an ideal choice for applications that require highly accurate motion sensing in a small package. It can provide a wide range of motion sensing applications, from vibration measurement to precise positioning systems. The device is capable of detecting acceleration in three axes of up to ±4g resolution with very low noise and power consumption.

The specific data is subject to PDF, and the above content is for reference