MMA7340LR2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Motion sensors are a vital part of many systems, most commonly as accelerometers. Accelerometers measure the linear acceleration of a body in response to an applied force or the rate of change in its velocity. The MMA7340LR2 is a three-axis (X, Y, Z) accelerometer, a type of transducer which converts mechanical movement into an electrical signal. It is a robust industrial grade device designed to provide reliable measurement of linear acceleration for use in industrial, automotive, and mobile applications.

The MMA7340LR2 is an ultra-low-power accelerometer designed for use in applications such as tilt sensing, tilt angle measurement, motion tracking, and motion discrimination. It is packaged in a small 3x3mm LGA package, and can operate over a temperature range of -45 to +85°C. It requires an external voltage supply of 3.3V, and can be controlled by a simple three-wire interface. The device uses a set of 5 digital output pins to send acceleration readings in 16-bit raw ADC values over the I/O interface. The user can set the sensitivity of the accelerometer to 1.5g, 6g or 12g/±25g range.

The MMA7340LR2 accelerometer offers excellent vibration rejection in multi-axis applications and signal linearity over the entire range of measurements. It features a low current consumption of 10μA in low-power mode with a specified 10-bit resolution. The device includes a temperature sensor with a 0.5°C accuracy and is capable of detecting static and dynamic acceleration data simultaneously. Additionally, the device is built with embedded digital filtering that is designed to reduce noise and provide instantaneous acceleration output.

The MMA7340LR2 works by using a built-in capacitive MEMS sensor element that senses linear acceleration and outputs an analog voltage. When a force is applied to the sensor, it results in a change in the capacitance of the element, which is converted into an analog voltage. This voltage is then digitized and sent as a 16-bit data value over the interface. The device also incorporates a set of on-board logic and control circuitry, including a self-test feature for verifying proper operation.

The MMA7340LR2 is an ideal solution for embedded applications that require a reliable, low-power motion sensor for capturing static and dynamic acceleration data. It is also an excellent choice for application that require vibration-rejection for multi-axis acceleration measurements. This accelerometer can be used in a variety of industrial, automotive, and mobile applications, allowing for accurate movement detection in mobile devices, as well as in industrial machinery and medical equipment.

The specific data is subject to PDF, and the above content is for reference