MMSZ5257B-7-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes Zener single MMSZ5257B-7-F are one of the most widely used components for circuit designs. They are used for voltage regulation, reverse voltage protection, and voltage rise protection.

The MMSZ5257B-7-F is a 3.9-volt zener diode. It contains two dissimilar diodes, PN junction diode and zener diode. The zener diode is used as the actual regulator while the PN junction diode helps to protect the circuit from over-current, mis-wiring, and overloads. The PN junction diode’s anode is connected to the anode of the Zener diode, while the cathode of the PN diode is connected to the cathode of the Zener diode. Since the two diodes are connected in reverse bias, the junction diode is reverse biased and acts as a short-circuit.

The Zener diode is a special purpose diode designed to regulate the voltage across a circuit. It acts as a variable resistor, maintaining the output voltage of the circuit even when the input voltage changes. The Zener diode provides relatively stable voltage regulation over a wide range of current and temperature conditions.

The MMSZ5257B-7-F has a maximum forward current of 3 milliamperes, it can handle a maximum power dissipation of 500 milliwatts and its zener voltage can be as high as 5.6 volts. This makes it ideal for use in applications such as linear regulators and in power supply designs for consumer electronics.

The device has a maximum reverse voltage of 5.6 volts and a breakdown voltage of 5.7 volts. Its maximum reverse current is 10 microamperes. The MMSZ5257B-7-F is also very noise tolerant and has low thermal resistance.

The MMSZ5257B-7-F working principle is based on the zener diode’s ability to regulate the voltage across the circuit. It does this by allowing current to flow when the input voltage is greater than the maximum reverse voltage (5.6 volts for the MMSZ5257B-7-F). The amount of current that flows depends on the magnitude of the input voltage. If the voltage goes up, the amount of current flowing through the diode increases. Since the diode is a variable resistor, the resistance decreases as the current increases, and the output voltage is regulated at the maximum reverse voltage.

The MMSZ5257B-7-F is a versatile and reliable component used in various applications, such as in power supplies, voltage regulation, and reverse voltage protection circuits. It is also used in power management solutions and automotive applications.

The specific data is subject to PDF, and the above content is for reference