MMXZ5237B-TP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MMXZ5237B-TP Zener diode stands for a single, medium power, voltage regulator. It is designed to be used in applications like power supplies, voltage clamping and voltage stabilizer, and the primary purpose of this diode is to regulate only the load voltage and current of the device. It produces a regulated, opposite-polarity voltage to maintain a reliable operating condition, while protecting the device from damage due to excessive voltages and current.

The MMXZ5237B-TP Zener Diode is built using a PN junction and an insulated gate field-effect transistor (IGFET). The PN junction is composed of two alternating layers of a semiconductor material. The layer of semiconductor material closest to the anode, or positive side of the diode, is called the N-type, while the layer closest to the cathode, or negative side of the diode, is called the P-type. This arrangement is called a PN junction.

The PN junction works by simply allowing electricity to flow from the cathode to the anode in a controlled manner and restricting the flow in the opposite direction. To prevent the flow in the opposite direction, the MMXZ5237B-TP Zener Diode has a gate in between the P and N layers, which acts asa switch that is closed when the voltage is above a certain threshold. This prevents any electrical current from damaging the device.

The MMXZ5237B-TP Zener Diode\'s operation is based on the characteristic of its PN junction, which is commonly referred to as the "Zener breakdown effect." When the PN junction is subjected to increasing voltages, the junction undergoes a break-down effect, allowing current to flow in the opposite direction. The voltage at which this occurs is called the "Zener voltage" and is typically between 4.3V and 56V.

When the MMXZ5237B-TP Zener Diode is connected to the power source, the voltage across the diode is determined by the device\'s operating point. The diode will typically operate at a voltage near to the Zener voltage, providing a reliable voltage stabilization, despite fluctuations in the applied voltage. However, it should be noted that the Zener effect can be overwhelmed if the applied voltage is substantially higher than the Zener voltage.

The MMXZ5237B-TP Zener Diode also has a maximum power rating of 750P and a power dissipation of 6.6W. The rated power is the maximum power that the diode can handle and is determined by the forward voltage and current, as well as the peak inverse voltage. In addition, the reverse current rating is 2mA.

Overall, the MMXZ5237B-TP Zener Diode is an excellent device for voltage regulation. It is used in a variety of applications such as power supplies, voltage clamping, and voltage stabilizers, and is an effective way to regulate the output voltage and current of the device. The diode\'s rated power, voltage, and current ratings make it well suited for a wide range of applications, and it is highly reliable, long-lasting, and cost efficient.

The specific data is subject to PDF, and the above content is for reference