MOC8050SD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MOC8050SD is a 4-pin optoisolator with an output voltage of 5.6 volts at 20 mA and a peak current transfer ratio of 200 percent. This optoisolator is designed to provide electrical isolation between two devices, allowing high levels of noise immunity and eliminating ground loops or ground bounce problems. The MOC8050SD is classified as an optoisolator with Transistor, Photovoltaic Output, meaning that the light received by the light-sensitive part of the device creates an output voltage in the transistor section.

The application field of an optoisolator such as the MOC8050SD is rather wide, mainly being used in digital and analog circuits. Examples of its applications include use as a line receiver to recover data and clock signals from a noisy transmission environment, as a switching device to activate and deactivate power switches, and as an interface between noisy digital electronics and sensitive analog electronics.

The working principle behind the MOC8050SD optoisolator is based on the photovoltaic effect, which is defined as the conversion of light energy into electrical energy. The optoisolator consists of two parts, the light-emitting diode (LED) and the photo-sensitive device. When the LED section is activated by the input current it emits a light signal which is received by the photodetector section and converted into an output voltage. The input LED current is designed to be low enough so that it is possible to drive the optoisolator at data rates of up to 20 kHz.

The MOC8050SD optoisolator is designed to provide electrical isolation between two devices, allowing high levels of noise immunity and eliminating ground loops or ground bounce problems. It has a wide range of applications, and its working principle is based on the photovoltaic effect. These features make the MOC8050SD an ideal solution in any system that requires high levels of electrical isolation.

The specific data is subject to PDF, and the above content is for reference