MOC8204

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electrical components that are used for electrical isolation and to prevent signals from being grounded. The MOC8204 optoisolator is a type of optoisolator that comes in a 6-pin DIP (dual in-line package) that provides electrical isolation between two circuits. It is a Transistor, Photovoltaic Output optoisolator that has a power output of as much as 25 mA (with a collector-to-emitter voltage of 0.8 V min) and a current of 100 mA (with saturation voltage drop of 0.1 V max).

The MOC8204 optoisolator operates in a range of -40°C to 85°C and its typical forward current is 5 mA or less. In order for the MOC8204 optoisolator to work, it requires a voltage of about 4.5 V to 11 V. It has a repetitive peak off-state voltage that is greater than 500V. It is also rated for 1.2KV RMS for 1 minute when used in electrical isolation applications. The MOC8204 optoisolator has a comparator output type and a forward voltage of 1.3V typ. max. It provides a tight coupling between input and output, a low-voltage operation, a noise immune design, and a wide operating temperature range. The MOC8204 optoisolator is ideal for use in pulsed systems, switch mode power supplies, medical instruments, and instrumentation where electrical isolation is needed.

The working principle of the MOC8204 optoisolator is based on the use of a photocoupler or optocoupler device which consists of a light source and a photodetector. The light source is typically a light emitting diode (LED). The photodetector is usually a phototransistor, photodiode, or a photovoltaic cell. The LED is used to emit light and the photodetector is used to detect the light and convert it into electric current. When a voltage is applied to the optocoupler, the LED will emit light which is then detected by the photodetector. The electric current generated is then passed to the output. The MOC8204 optoisolator can transfer signals from one circuit to another without any physical connection, making it ideal for electrical isolation applications.

The MOC8204 optoisolator is more efficient than many of its counterparts because it has an on-off ratio of 0.1, meaning that it can switch from one state to another more quickly. Its wide temperature range and noise immunity makes it ideal for use in industrial, medical, and home aplications, as well as other areas where electrical isolation is important. The MOC8204 optoisolator is also relatively inexpensive and can be easily integrated into existing systems. The MOC8204 optoisolator is a great device for use in demanding electrical isolation applications because of its high performance, added safety, and cost effectiveness.

The specific data is subject to PDF, and the above content is for reference