MP20041DGT-PP-LF-P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC, or Power Management IC, is a chip that helps to reduce power consumption in electronic devices. The MP20041DGT-PP-LF-P, from Monolithic Power Systems, Inc., is a linear voltage regulator, or a device that maintains a constant voltage for a given amount of current. It is designed for use in low-voltage, battery-powered (5V or lower) applications such as computers, laptops, and even cell phones.

The MP20041DGT-PP-LF-P is an adjustable regulator, offering a low dropout voltage solution. It features an output current range of 0.1A – 3.0A, while the output voltage range can be adjusted from 0.9V to 5.0V in 250mV steps. The voltage can also be trimmed and stabilized with an external resistor. The regulator also has an enable pin, with an active low function, so that it can be completely shut off when not in use.

The current limit for the MP20041DGT-PP-LF-P is controlled and regulated by an internal pass transistor. This provides good protection from reverse current, ensuring that the output voltage remains constant even if current draw is increased. The regulator is also protected from overloads and short circuits.

The MP20041DGT-PP-LF-P is a drop-in replacement for LM2940-1AMP linear regulator, and offers several advantages such as low quiescent current, up to 95% efficiency, and small size. The regulator is primarily designed for use in energy-conscious applications, in order to obtain the most efficient performance and longest battery life possible. It has a wide operating temperature range of -40°C to +125°C, and is designed to safely handle large input voltage spikes.

The general purpose of the MP20041DGT-PP-LF-P is to convert battery power into a constant, regulated output voltage. The device running on battery power is connected to the input voltage of the regulator, and its output will be the same voltage regardless of fluctuations in the input. This is achieved by sensing the output voltage, and maintaining the voltage output by utilizing the current input from the battery.

For applications requiring a higher current than 3A, the regulator can be paired with an external transistor for support. The external transistor functions as an additional current control to allow the output current to go beyond the limit of the internal control. In this case, the output voltage will only remain steady up to the current limit specified by the external transistor. However, the manufacturer suggests that a current limit of 6A should not be exceeded in order to avoid overloading the regulator.

The MP20041DGT-PP-LF-P is an ideal linear voltage regulator for low-voltage, battery-powered applications. It is efficient, small in size, and offers an adjustable output voltage range of 0.9V to 5.0V. It also has an intuitive enable pin that allows for the shut off of the device when not in use. Its advanced protection features ensure safety from overloads, reverse current, and even large input voltage spikes. Its general use is to power devices requiring a constant, regulated output voltage even without an external transformer, up to a specified current rating.

The specific data is subject to PDF, and the above content is for reference