MP6516GF-Z

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. DESCRIPTION

The MP6516GF-Z is an H-bridge motor driver that operates from a supply voltage up to 35V and delivers a motor current up to 2.8A. Typically, the MP6516 is used to drive a DC brush motor. For the MP6516, control of each half-bridge is independent, using IN1, IEN1, IN2, and EN2 pins. An internal current-sensing circuit provides an output voltage proportional to the load current. The MP6516GF-Z also has cycle-by-cycle current regulation and limiting. These features do not require the use of a low-ohm shunt resistor. Full protection features include over-current protection (OCP), input over-voltage protection (OVP), under-voltage lockout (UVLO), and thermal shutdown. The MP6516GF-Z is available in a 16-pin TSSOP-EP (5.0mmx6.4mm) with an exposed thermal pad. 

2. FEATURES

    1. Wide 5.4V to 35V Input Voltage Range

    2. 2.8A Peak Output Current

    3. ½-H control, input logic (INx, ENx)

    4. Internal Full H-Bridge Driver

    5. Cycle-by-cycle Current Regulation / Limit

    6. Low On Resistance (HS:250mΩ, LS:250mΩ)

    7. Simple, Versatile Logic Interfaces

    8. 3.3V and 5V Compatible Logic Supply

    9. Over-Current Protection (OCP)

  10. Over-Voltage Protection (OVP)

  11. Thermal Shutdown

  12. Under-Voltage Lockout (UVLO)

  13. Fault Indication Output

  14. Available in a Thermally Enhanced SurfaceMounted TSSOP-16 EP Package 

3. APPLICATIONS

    1. Solenoid Drivers

    2. DC Brush Motor Drivers

4. PACKAGE REFERENCE

5. ELECTRICAL CHARACTERISTICS

6. PACKAGE INFORMATION

hot deals

PMEG2005AEA,115           MSP430F248TPM           TPS40057PWPR