MPX5010GS

Series:	MPX5010
Part Status:	Active
Pressure Type:	Vented Gauge
Operating Pressure:	1.45 PSI (10 kPa)
Output Type:	Analog Voltage
Output:	0.2 V ~ 4.7 V
Accuracy:	±5%
Voltage - Supply:	4.75 V ~ 5.25 V
Port Size:	Male - 0.19" (4.93mm) Tube
Port Style:	Barbed
Features:	Temperature Compensated
Termination Style:	PCB
Maximum Pressure:	5.8 PSI (40 kPa)
Operating Temperature:	-40°C ~ 125°C
Package / Case:	6-SIP Module
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to MPX5010GS

The MPX5010GS is an analog polysilicon pressure sensor designed to measure absolute pressure over a range from 100 to 500 kPa gauge. It is offered in an SOIC-8 (slim small outline package) package which allows its use in applications with limited power, space and budget. It is a low-cost, low-consumption solution to many pressure sensing applications.

MPX5010GS Application Fields

The MPX5010GS is well-suited for a wide range of applications, particularly those requiring low power consumption, such as consumer-level products. It is particularly useful for automotive and medical applications, as well as aviation and aerospace applications.The MPX5010GS is particularly useful for applications that require measuring dynamic pressure, such as automotive throttle position measurement, fuel system pressure and performance measurement, aircraft cabin pressure measurement, and medical barometric pressure measurement. Additionally, the MPX5010GS can be used in non-pressure applications, such as temperature input and force sensing.

MPX5010GS Principle of Operation

The MPX5010GS pressure sensor contains a special strain gauge that is nonlinearly sensitive to pressure. It uses polysilicon thin film technology to sense an absolute pressure over a range from 100 to 500 kPa gauge and produces a differential output signal proportional to the applied pressure. It is designed for use in harsh environments, such as those common to automotive and aviation applications.The MPX5010GS utilizes a bridge circuit to form a Wheatstone Bridge configuration. The bridge contains four resistive elements, two of which are connected to a varying pressure source. These two resistive elements can be reference or active. The other two are a reference resistor and a compensating resistor. The bridge is then linked to a differential amplifier, which produces a 0.6-4.5-volt output signal, proportional to the differential pressures being applied to the resistive elements.

Conclusion

The MPX5010GS is an analog polysilicon pressure sensor designed to measure absolute pressure over a range from 100 to 500 kPa gauge. It offers various advantages over other deformable member pressure sensors, including a robust design, a high degree of accuracy and a low power consumption. It is well-suited for a wide range of applications, particularly those requiring low power consumption, such as automotive and medical applications, as well as aviation and aerospace applications. It utilizes a bridge circuit to form a Wheatstone Bridge configuration, which produces a 0.6-4.5-volt output signal, proportional to the differential pressures being applied to the resistive elements.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description