MPXH6250AC6U

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure sensors are transducers, which measure the pressure of a liquid, gas, or solid, and converts this pressure into an output signal to indicate the pressure value. One type of pressure sensor is the MPXH6250AC6U which is mainly used in air flow, air velocity, battery storage and other measurement and control applications. 

The MPXH6250AC6U is a piezoresistive pressure transducer that uses a Wheatstone bridge circuit to measure and convert pressure. It is a single-ended pressure port, meaning that it should be used in applications wheres a single pressure port is needed. The MPXH6250AC6U also comes in a wide variety of pressure ranges to meet the requirements of most applications. The device’s accuracy is 0.25% and the maximum operating temperature is-40 C up to 125 C. 

The transducer’s pressure ports are connected to the two differential inputs of the instrumentation amplifier via a high-precision Wheatstone bridge, which is the sensing element. The Wheatstone bridge is a network of four resistors connected in a bridge form to each other. When an external force is applied to this bridge, the output voltage of the bridge changes. This change in the output voltage is then amplified by the instrumentation amplifier and outputted as an AC pressure signal. 

The MPXH6250AC6U is designed to be used in applications such as air flow, air velocity, and battery storage. For air flow applications, the transducer is connected to a fan or an air moving device to measure the pressure difference between two points in a tube or an enclosure. The output signal is then used to control the air flow rate depending on the requirements of the application. In air velocity applications, the transducer is used to measure the air velocity and then output a corresponding voltage or PWM signal that is used to control the air velocity. For battery storage applications, the MPXH6250AC6U can be used to measure the pressure of the storage batteries and then output a corresponding voltage or PWM signal. This signal is then used to control the charge/discharge rate of the battery depending on the requirements of the application. 

In summary, the MPXH6250AC6U is a piezoresistive pressure transducer, which is mainly used to measure, monitor, and control air flow, air velocity, and battery storage applications. The transducer can be used in a wide variety of applications with accuracy of 0.25% and an operating temperature range of-40 C up to 125 C. It is important to note that the transducer is a single-ended pressure port, so it should only be used in applications that only require one pressure port. 

The specific data is subject to PDF, and the above content is for reference