MSMLJ85CA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MSMLJ85CA devices are a type of surface-mount Transient Voltage Suppressor (TVS) diode. These are semiconductor devices used to protect systems from transient voltage events, such as electrostatic discharges (ESD). The MSMLJ85CA is a fast-acting, unidirectional device, meaning it will conduct current in one direction and block current in the opposite direction. The device consists of two diodes connected in a parallel configuration, allowing it to clamp voltage levels below the breakdown voltage and dissipate energy resulting from voltage spikes.

TVS diodes are designed to protect circuits from voltage transients, including lightning-induced surges or ESD. These transients can cause damage to integrated circuits (ICs) or other sensitive components due to excessive voltages. These devices can be used to protect Sensitive Components, including FPGAs and ASICs, digital and analog circuits, and control/signal lines.

The MSMLJ85CA is designed for protection against high-energy transients, which can occur due to lightning strikes, electrical switching, load dumping, and high-energy electrostatic discharges ( ESD). It is rated for a maximum peak pulse power of 7.5 kV, and a maximum clamping voltage of 5.5V. This makes it suitable for protecting circuits from electrostatic discharges which can reach levels as high as 8 kV.

The device is packaged in a Surface Mounted Device (SMD) package, allowing for it to be easily soldered onto printed circuit boards. It is available in a SOT-23 package, which has three terminals and is widely used in consumer electronics.

The working principle of the MSMLJ85CA is based on the same principle as other TVS diodes. It consists of two diodes connected in a parallel configuration which have a breakdown voltage, Vbr. When a voltage surge occurs, the diode will clamp the voltage at a level below the breakdown voltage, Vcl, and dissipate the energy. This prevents the voltage from exceeding the breakdown voltage and damaging the circuit.

In addition, the device is designed to operate with a very fast response time. For large surges, such as those caused by lightning, the response time is typically 1ns. This ensures that the device is able to protect the circuit from the high-energy transients which can occur even with a faster rise time than other types of transient voltage suppressors.

The MSMLJ85CA is an effective and reliable way to protect circuits from transient voltage events, such as lightning strikes and ESD. Its fast response time and high breakdown voltage make it suitable for a wide range of applications, such as consumer electronics and other sensitive components. In addition, its small package size allows it to be easily integrated into new designs, or used in existing designs with minimal modifications.

The specific data is subject to PDF, and the above content is for reference