MT48H16M32LFCM-75 IT:B TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory is an integral part of almost all modern computing systems. It is used to store information as well as instructions that are executed or read by the CPU. The MT48H16M32LFCM-75 IT:B TR is a particular type of memory that is used in many different applications.

The MT48H16M32LFCM-75 IT:B TR is a synchronous dynamic random access memory (SDRAM) device. It is a dual port RAM device with a 16 Megabit (2 megabytes) capacity and is capable of running at frequencies up to 166 MHz. The device has an interface that is based on the SDRAM protocol and is backwards compatible with all previous SDRAM devices. It is commonly found in embedded systems, computer systems, telecommunications, and many other applications.

The device is organized into 8 banks of 16-megabit memory cells, each with its own independent memory controller. The device has three adjustable parameters that can be used to adjust the performance of the memory depending on the application it is being used in. These parameters are clock frequency, data rate, and refresh rate. The refresh rate is adjustable to either 64Ms or 32Ms.

The MT48H16M32LFCM-75 IT:B TR uses a synchronous interface to communicate with the system clock. When the system clock is running, the memory controller signals to the SDRAM which address is to be accessed, along with a read or write command and the data. The SDRAM transfers the requested data from the memory cells to an output buffer. The output buffer then converts the data into a format that the system can use, and sends it off to the requesting device.

The MT48H16M32LFCM-75 IT:B TR is designed for applications where speed and reliability are essential. It is capable of operating at speeds of up to 166MHz, and its two-bit interface allows for faster read and write operations. Its dual-port memory access design allows for simultaneous access of two different data addresses, which can help to increase system performance. The device\'s adjustable refresh rate and adjustable data rates provide further flexibility, allowing it to adjust to the requirements of the application.

In addition, the MT48H16M32LFCM-75 IT:B TR is designed with error detection and correction features. A built-in ECC (Error Correcting Codes) feature allows the memory controller to detect and correct any errors that may occur during a read or write operation. This helps to reduce data loss and can improve the reliability of the system. In addition, the device is designed with built-in power management features which allow it to save power when the system is in standby or sleep mode.

The MT48H16M32LFCM-75 IT:B TR is a reliable, high-performance memory device that is suitable for a wide range of applications. Its fast access speed and error detection and correction features make it a great choice for embedded systems, computer systems, telecommunications, and many other applications where speed and reliability are essential.

The specific data is subject to PDF, and the above content is for reference