MURD330T4G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MURD330T4G are single diodes rectifiers often used in a variety of applications. These components are widely used to create high-frequency modulation, conversion, pitchcontrol, power supply design, and in some radar applications. They provide excellent performance in these applications due to their capabilities to accurately switch small or large signals with a wide voltage range.

The MURD330T4G contains four terminals, two cathodes, two anodes and a gate. The two anode terminals are labeled “A” and “B” while the two cathode terminals are labeled “K” and “K”. In normal operation, the A/B terminals will be connected to the power source while the K/K terminals are connected to a load, such as a circuit board. The gate terminal is used to control the switch on and off and can be activated by either a DC or AC signal.

The working principle of the MURD330T4G is quite simple. When the gate terminal is connected to the power source and current is applied, the MURD330T4G will switch on, allowing current to flow from the A/B terminals to the K/K terminals. When the gate current is removed, the MURD330T4G will switch off and current will be blocked from flowing from the A/B terminals to the K/K terminals. The switching time of the MURD330T4G is extremely fast, typically in the nanosecond range.

The MURD330T4G is great at providing both high on and off state breakdown capability, making it an ideal solution for applications that require high-current switching of large voltages. Its fast-switching capabilities also make it an ideal solution for switching signals in the kHz range, such as in modulation, conversion, and pitch control applications. Additionally, because the MURD330T4G is low-noise and can be connected across a wide variety of power sources and loads, it is also great for improving the performance of power supplies.

MURD330T4G are single diodes rectifiers widely used in many kinds of applications. They have four terminals, two anodes, two cathodes and a gate, and the working principle is based on controlling the state of the switch by applying a current to the gate terminal. These components offer excellent performance for high-frequency applications, have good switching speed, breakdown capability, low noise, and can be connected across a variety of power sources and loads. As a result, they are an ideal solution for power supply design, pitchcontrol, modulation, and conversion applications.

The specific data is subject to PDF, and the above content is for reference