MURTA20040R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are an important component in many electronic circuits. They are used for rectifying alternating current (AC) signals and for providing an isolation barrier between different components. Diodes can also be arranged in arrays to further control the flow of current in a circuit. The MURTA20040R is a rectifier array that is specifically designed for higher power applications.

The MURTA20040R is a single component that has two separate diodes in a single package. Each diode is connected in series with the anode (positive) terminal of one diode connected to the cathode (negative) terminal of the other. This arrangement makes it simpler for designers to provide a full bridge rectification circuit, which can then be used for power conversion and in power supply designs.

In addition to its use as a bridge rectifier, the MURTA20040R can also be used to provide a higher impedance path than a single diode could provide. This allows the MURTA20040R to be used as a suppressor diode in high voltage circuits where a small voltage spikes can cause large current surges. This allows designers to protect sensitive components such as transistors and amplifiers from over-voltage damage.

In its simplest form, the MURTA20040R works like any other bridge rectifier. When AC voltage is applied between the anode and cathode terminals of the diodes, current will flow through the diodes during the positive and negative half-cycles of the AC voltage cycle. During these positive and negative half cycles, the diodes will switch on and off alternately, allowing current to flow through the circuit, but blocking any current in the reverse direction. This allows designers to convert AC power, such as from a wall outlet, into DC power, which can then be used to power circuits.

The MURTA20040R is also designed to withstand higher current flows than other similar rectifier arrays. The two diodes are connected in parallel, allowing the current flow to be divided between the two diodes. This reduces the amount of current that each diode has to handle and also increases the overall efficiency of the rectifier array. The MURTA20040R can handle up to 8 amps of forward current, and up to 8 amps of reverse current.

The MURTA20040R is also designed to withstand higher voltage spikes than other similar rectifier arrays. The device can operate at up to 200 volts of forward voltage, and up to 40 volts of reverse voltage, making it suitable for use in high voltage and high current circuits. The device is also designed to be resistant to temperature and vibration, making it well suited for use in harsh environments.

The MURTA20040R is a useful device for designing power supplies, AC-to-DC converters, and for providing reverse voltage blocking and transient voltage protection in circuits. Its superior current handling and voltage blocking capabilities make it a suitable choice for applications where high current and high voltage environments are present. Its resistance to temperature and vibration also make it suitable for use in applications with harsh environmental conditions.

The specific data is subject to PDF, and the above content is for reference