MXSMCJ6.5A Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Diodes are a type of component used in the power management system of electronic devices. The MXSMCJ6.5A belongs to this category and is used to provide a high level of protection against ESD surges, EFT transients, or inductive spikes. This TDVS is fabricated from a power semiconductor, hence its higher capacity to tolerate transient conditions. It is widely used in automotive, industrial, medical, consumer electronics, and other portable applications.

The MXSMCJ6.5A consists of a junction termination to absorb the voltage spikes. The junction can absorb electrostatic discharges up to 6.5kV and EFT transients up to 4kV. The voltage clamping occurs due to an increase in the reverse conduction current when the junction reaches the peak voltage level. This junction requires the input of a low voltage supply, and the clamping voltage can be regulated by varying the input voltage.

The operation of the device can be explained as follows. When the input supply is energized, the diode chain is forward biased and conduct current from a high voltage source to a lower voltage load. As the voltage level across the diode exceeds the breakdown voltage, the reverse diode current increases, thereby clamping the voltage and absorbing the spike. The ESD protection voltage slowly reaches the line voltage and returns the device to its quiescent state.

The MXSMCJ6.5A is a rugged protection device with a low stand-off voltage of 6.5kV and a maximum clamping voltage of 39V. It has a low-capacitance of 5.5pF and a fast reaction time of 10ns. The device can handle a maximum peak pulse current of 166A at 10% duty cycle and a maximum continuous working voltage of 10V. The device also provides an enhanced power cycling capability of up to 500 cycles.

In conclusion, the MXSMCJ6.5A is an ideal protection device for a wide range of applications. Its low stand-off voltage, fast response time, and cycling capabilities make it an excellent choice for protecting electronic components from transient surges. The device operates by clamping the voltage and absorbing the surge, and its current characteristics can be varied depending on the input voltage. In addition, it is a rugged device with enhanced power cycling capabilities of up to 500 cycles.

The specific data is subject to PDF, and the above content is for reference