NCV891334MW33R2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Voltage regulators are an integral part of any electric system. They are used to maintain a consistent voltage level, regardless of changes in the power supply. A DC DC switching controller is a common type of voltage regulator, and is used in a variety of applications. The NCV891334MW33R2G is a DC/DC switching controller that has been designed as an active-low controller for a wide range of applications. This article will discuss the application field and working principle of the NCV891334MW33R2G.

NCV891334MW33R2G Application Field

The NCV891334MW33R2G is designed for use in power supplies, and is typically used as a battery charger or a programmable, switch-mode voltage regulator. It is also suitable for use in other applications such as AC/DC converters, DC/DC converters, and buck converters. The NCV891334MW33R2G is capable of operating from an input voltage range of 2.5V to 32V, with an output voltage of 0.7V to 20V.

The NCV891334MW33R2G is designed to be an efficient and cost-effective controller, with a low start-up current and a low power loss during normal operation. It is also integrated with a variety of features that make it ideal for a wide range of applications. These include spread spectrum frequency modulation, an adjustable current sense offset, a maximum duty-cycle limitation, and a programmable soft start.

The NCV891334MW33R2G is available in a variety of packages. It is available in a standard TO-220-5 package, as well as a Lead-free version and a DFN-6#1 package. This makes the NCV891334MW33R2G suitable for use in a variety of applications, from battery chargers to AC/DC and DC/DC regulators.

NCV891334MW33R2G Working Principle

The NCV891334MW33R2G is an active-low switch-mode voltage regulator, meaning that it regulates the output voltage by constantly adjusting the duty cycle of an internal switch. This switch is connected to the input source and output load, and when the switch is on, the input voltage is applied to the output load. When the switch is off, the output voltage is maintained.

The duty cycle of the switch is controlled by the NCV891334MW33R2G\'s internal logic circuit, which is controlled by the voltage feedback loop. This voltage feedback loop is composed of the Vcc pin and the GND pin, where Vcc is connected to the input voltage, and GND is connected to the output voltage. When the output voltage is higher than the expected voltage, the logic circuit will reduce the duty cycle to lower the output voltage. Conversely, when the output voltage is lower than the expected voltage, the logic circuit will adjust the duty cycle to increase the output voltage.

The NCV891334MW33R2G also comes with various safety features to ensure the proper operation of the system. It has built-in short-circuit protection, over-voltage protection, and thermal shutdown protection. These safety features help to protect the system from damage due to excessive power, short circuits, and overheating.

Conclusion

The NCV891334MW33R2G is a versatile, cost-effective DC/DC switching controller that can be used in a wide range of applications. It is integrated with several features such as spread spectrum frequency modulation, adjustable current sense offset, and a programmable soft start. Its safety features help to protect the system from damage due to excessive power, short circuits, and overheating. It is suitable for use in battery chargers, AC/DC and DC/DC converters, and buck converters.

The specific data is subject to PDF, and the above content is for reference