NTSB30100S-1G

Series:	--
Packaging:	Tube
Part Status:	Active
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	100V
Current - Average Rectified (Io):	30A
Voltage - Forward (Vf) (Max) @ If:	950mV @ 30A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	1mA @ 100V
Capacitance @ Vr, F:	--
Mounting Type:	Through Hole
Package / Case:	TO-262-3 Long Leads, I²Pak, TO-262AA
Supplier Device Package:	I2PAK (TO-262)
Operating Temperature - Junction:	-40°C ~ 150°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes — Rectifiers — Single

A single rectifier diode is a two-terminal electronic component with a number of uses in modern electronics circuits. The most common type of single rectifier diode is the NTSB30100s-1G. This diode has a range of applications and a working principle which make it invaluable for a range of different purposes in complex electronic systems.The NTSB30100S-1G is a common component in the construction of switched-mode power supplies (SMPS). It is used to protect against the flow of current in a single direction. When the diode is forward biased, it allows the current to flow in a single direction and blocks any current flow in the reverse direction. This is a useful function in circuits that require protection from spike voltages which can damage sensitive components.As well as protecting against spike voltages, the NTSB30100S-1G can also be used to control the flow of current in AC circuits. When connected between two nodes, the diode will allow current to flow in one direction and block any current from flowing in the reverse direction. This is useful for controlling the flow of current in sensitive or sensitive applications, such as motor control, switching circuit components or powering low-current circuits.The NTSB30100S-1G also has a number of uses in power rectifying circuits, where it is used to convert AC voltage into DC voltage. In these circuits, the diode is connected in parallel with an AC source, and the rectified DC voltage is obtained from the current that flows in one direction only. This is an important function as it allows AC voltage to be used in applications where only DC voltage is required.The diode also has a use in radio frequency (RF) applications. It can be used to shunt radio frequency currents away from sensitive components, such as the antenna. This is achieved by the diode allowing the current to flow in one direction only, and by blocking any current from flowing in the reverse direction.Finally, the NTSB30100S-1G can also be used as a protection device in power grids. When an AC current passes through the diode, it blocks any current from flowing in the reverse direction. This is useful for preventing power outages, as it helps keep the grid operating smoothly.Overall, the NTSB30100S-1G is a versatile and powerful device which can be used in a range of applications in complex electronic systems. Its ability to control and protect against the flow of current makes it invaluable in many industrial and consumer electronics circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description