NZ9F3V6T5G Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes come in a variety of types and stress conditions, including Single Zener Diodes, one of which is the NZ9F3V6T5G. Its application field and working principle are discussed in this article.

Single Zener Diodes, such as the NZ9F3V6T5G, are primarily designed to function as a clamping device in circuit design. A typical application is when two different DC power sources need to be connected, but each source has a different voltage: the Zener diode can be placed in series between them to ensure that the voltage of one source never exceeds that of the other one. Since the NZ9F3V6T5G is rated for 3.6 volts, it can be used in any application where the higher voltage source needs to be clamped to 3.6 V. It can also be used to protect low voltage sources from overvoltage conditions by allowing current to pass through it in one direction until the voltage reaches 3.6 V.

The NZ9F3V6T5G is a 5% tolerance Zener diode, which means that under normal conditions it will maintain a voltage drop of between 3.4 V and 3.8 V. This tolerance makes it useful for applications where a precise voltage limit is necessary, such as in various voltage regulators. The diode can be used as a shunt element, in which it will short out a circuit when the voltage exceeds the rated limit.

Like all diodes, the NZ9F3V6T5G is a two-terminal semiconductor device that can only allow current to flow in one direction. When reverse biased, the diode will block current flow, while when forward-biased, it will allow current to flow through it. With the NZ9F3V6T5G, the reverse breakdown voltage (V_Z) is typically 3.6 V, but can vary slightly up to 5%. When the voltage across it is equal to or greater than this V_Z, the diode will begin to conduct and create a voltage drop across it with a corresponding current.

The NZ9F3V6T5G is a silicon epitaxy, axial leaded PN junction diode, specially designed with a higher performance and power-handling capacity to facilitate its use as a Zener diode. Its typical junction capacity is 540pF, and its maximum operating power dissipation is 500mW. The maximum junction temperature for this diode is 150°C, and the diode can withstand a maximum reverse surge current of 5A.

In summary, the NZ9F3V6T5G is a Single Zener Diode primarily used in voltage clamping and voltage protection applications, able to limit the voltage of one source and protect low voltage sources from overvoltage conditions. It is a 5% tolerance Zener diode rated for 3.6 V and can be used in voltage regulators where a precise voltage limit is needed. It is a two-terminal semiconductor device composed of a silicon epitaxy, axial leaded PN junction diode and a maximum junction temperature of 150°C.

The specific data is subject to PDF, and the above content is for reference