P1087

Series:	--
Packaging:	Bulk
Part Status:	Obsolete
FET Type:	P-Channel
Voltage - Breakdown (V(BR)GSS):	30V
Current - Drain (Idss) @ Vds (Vgs=0):	5mA @ 20V
Voltage - Cutoff (VGS off) @ Id:	5V @ 1µA
Input Capacitance (Ciss) (Max) @ Vds:	45pF @ 15V
Resistance - RDS(On):	150 Ohms
Power - Max:	350mW
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-226-3, TO-92-3 (TO-226AA)
Supplier Device Package:	TO-92-3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>The P1087 is a junction Field Effect Transistors (JFET) that is used in a variety of electronic circuits and applications. It is a voltage controlled field effect transistor with a gate-source voltage used to control the Drain-Source current. The P1087 is a three-terminal transistor device that is capable of giving very sensitive control of the drain current over a wide range of drain-source voltage.</p><p>The P1087 is used in many applications ranging from amplifiers, voltage regulators, and motor control circuits, to audio and frequency control. This transistor is used in a wide range of devices and applications, ranging from analog circuit to digital circuits. It can also be used in applications where other types of transistors would not be able to provide the same performance.</p><p>The P1087 is made up of two terminal called the drain and source, and a third terminal called the gate. The drain and source act as current carriers and the gate acts as a voltage control electrode. There are two types of P1087 available: depletion-type JFET and enhancement-type JFET. The depletion type JFET has a reverse bias of the gate-source voltage, which suppresses conduction from the drain-to-source, whereas an enhancement type has a forward bias of the gate-source voltage, which increases the drain-to-source conduction.</p><p>The working principle of the P1087 is based on the control of the current flow between the drain and the source. When the voltage at the gate is set below the voltage of the drain, the operating point of the junction is moved to an area where only leakage current flows between source and drain. When the voltage at the gate is higher than the voltage of the drain, the P1087 operates in an on state, allowing the drain current to flow through it. Since the amount of current that flows through the P1087 is proportional to the gate-source voltage, this transistor is often used as an amplifier.</p><p>The P1087 is a popular electronic component because of its low cost and wide availability. It is used in many consumer electronics and is a reliable component for a variety of applications. The P1087 is also known for its low noise level, high switching speeds, and good linearity. Because of its wide range of applications and reliable performance, the P1087 is often used for general purpose applications.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description