PEMI2STD/CM,115 Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Electromagnetic interference (EMI) or radio frequency interference (RFI) filters are electronic devices that are used to reduce the occurrence of unwanted interference caused by different transmissions. The type of filter used depends on the application and the type of interference that is being suppressed. The filters are most commonly used in devices such as mobile phones, computers, modems, and other electronic equipment prone to interference. One of the more common types of filters is known as the PI2STD/CM,115.

The PI2STD/CM,115 is a microcircuit EMI/RFI filter designed for use in a variety of applications. Its main purpose is to provide an effective means of preventing interference from radio waves (RF) and other unwanted signals from entering or leaving a system. The filter consists of an array of inductors, capacitors, and resistors bonded together in a small package. This combination is then connected to the device’s power supply or signal lines in order to reduce the amount of interference that passes through.

The filter works by diverting any interference away from the sensitive electronics by creating an attenuation or low-pass filter. Attenuation is the reduction in signal strength caused by the filter, while a low-pass filter blocks out any higher-frequency signals. The filter is designed to provide the highest level of attenuation over a predetermined bandwidth and is highly effective in minimizing the amount of unwanted noise, allowing only desirable signals to pass through.

The PI2STD/CM,115 can be used to filter out interference from a wide range of sources such as cellular, microwave, Bluetooth, or Wi-Fi devices. It is also used in high-speed data transfer applications to block out unwanted signals. It is capable of blocking out frequencies from 0 Hz to 100 MHz and is highly effective in blocking out harmful signals. The filter has a high operating temperature range of -55°C to +125 °C, making it suitable for use in a wide variety of applications.

The PI2STD/CM,115 is a highly effective EMI/RFI filter and is used in a wide variety of applications. It has a wide operating temperature range, which makes it suitable for use in many harsh environments, and is capable of blocking out a wide range of frequencies. The filter is easy to install and requires minimal maintenance, making it a cost-efficient choice for any application requiring EMI/RFI protection.

The specific data is subject to PDF, and the above content is for reference