PGSMAJ14A M2G Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (transient-voltage-suppression) diodes are an important class of electronic components used to protect vulnerable circuitry from power surges. The PGSMAJ14A M2G is one such TVS diode designed for use in automotive applications. It is designed to protect automotive electronics from transient voltage, transients, and noise in ground lines.

The PGSMAJ14A M2G has two main components: a Zener diode and a gas tube. The Zener diode works by providing a low-resistance path for current in the reverse direction, thereby reducing the voltage across the diode to a lower level. This reduces the magnitude of the voltage spike. The gas tube works by providing what is known as its breakdown voltage. The breakdown voltage is the voltage at which the gas tube conducts current in the reverse direction, thus providing additional protection from power surges.

The PGSMAJ14A M2G\'s working principle relies on two distinct functions:

1. Working as a protective component when a voltage surge occurs, it diverts the surge away from vulnerable circuits.
2. Working as a filter by suppressing any noise or transient-voltage events.

In detail, the PGSMAJ14A M2G works in the following manner. First, its Zener diode limits excessive voltage and current at the start of the surge, protecting both the circuits and the M2G. When the surge voltage exceeds the Zener diode\'s breakdown voltage, the gas tube takes over, providing additional protection. However, the gas tube\'s protection is limited to surges of very short duration, typically less than 1 millisecond. While the Zener diode and gas tube do provide some protection from longer duration surges, additional protection may be necessary for surges of greater duration.

In order to work effectively, the PGSMAJ14A M2G must be placed in the appropriate position. Typically, the TVS diode is placed between circuit common and the power supply ground. Placing the diode in the opposite direction, with the power supply ground in between circuit common and the diode, will not provide protection against voltage surger or transients because the Zener diode will not be triggered. In addition, the PGSMAJ14A M2G should be placed as close as possible to the circuits they are intended to protect.

Due to its ability to provide effective protection against transient voltages, transients, and noise in ground lines, the PGSMAJ14A M2G is well-suited for use in automotive electronic applications. Additionally, its gas tube provides additional protection against high-energy transient surges, making it an excellent choice for protecting automotive electronics.

The specific data is subject to PDF, and the above content is for reference