PM2260A50VJH

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Contactors (Solid State)

A contactor is a large relay used to control a high-amperage circuit with a low-amperage signal. One of the most common types of contactors is the solid-state contactor. This type of contactor is a semiconductor device which uses the electrical conductivity of semiconductor material to switch current in circuits.

The PM2260A50VJH contactor is a solid-state device designed for the control of high-amperage circuits. The device is rated at 500 volts and 12 amps, and can be used in many applications. It is a reliable and cost-effective solution for controlling high-current loads safely and efficiently.

Application Field

The PM2260A50VJH contactor is designed for applications which require high-amperage control. It is suitable for use in applications such as HVAC, motor control, electrical apparatus, industrial automation, and many other industries where high-amperage control is needed.

The contactor can be used in many types of electrical circuits. It is especially useful in applications which require the control of high-current loads. In HVAC systems, for example, the device can be used to control the operation of motors and other electrical components. In industrial automation applications, the contactor can be used to control AC or DC equipment.

The device is also suitable for use in light commercial applications such as lighting control. In these applications, the contactor can be used to switch large currents on and off in a safe and efficient manner.

Working Principle

The PM2260A50VJH contactor is a semiconductor device which uses the electrical conductivity of semiconductor material to switch current in circuits. The device is made up of two power terminals and two control terminals. The power terminals are connected to the high-voltage power supply, and the control terminals are connected to a low-voltage control signal.

When a control signal is applied to the contactor, an electric current flows through the semiconductor material. This electric current causes the contacts to move, and the two power terminals are then connected to each other. This allows the high-amperage power supply to be connected to the load.

When the control signal is removed, the electric current stops flowing through the semiconductor material. This causes the contacts to move apart, and the two power terminals are then disconnected from each other. This disconnects the power supply from the load, and the circuit is then off.

The PM2260A50VJH contactor is a reliable and cost-effective solution for controlling high-current loads safely and efficiently. It is designed for applications which require high-amperage control, and can be used in many types of electrical circuits.

The specific data is subject to PDF, and the above content is for reference