PMC0805-102

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite beads and chips are small electronic components that can be used in a variety of applications, and the PMC0805-102 is no exception. The PMC0805-102 is a type of ferrite bead and chip that is widely used in the electronics industry. In particular, it can be used in applications such as digital signal line noise suppression, high-frequency circuit noise absorption, and pulse signal line holdover.

The PMC0805-102 is a type of ferrite bead and chip that is composed of a nickel-zinc ferrite core and an epoxy resin encapsulation. The core is composed of nickel and zinc that is sintered at high temperatures, and the encapsulation is there to provide protection from external forces, such as water and dust. The bead has an outer dielectric that is composed of an epoxy resin, which helps to further contain the energy and eliminate any unnecessary electromagnetic interference, allowing the electronics to operate as well as possible in a variety of environments.

The PMC0805-102 is usually sold in the form of a chip, measuring 8 mm in length and 5 mm in width. It has a maximum frequency limit of 70MHz and a maximum current limit of 0.4A. The chip also has a very low equivalent series resistance (ESR) of 0.01Ω.

The main purpose of the PMC0805-102 is to reduce the amount of electromagnetic interference (EMI) that can occur in some electronic circuits. This is done by absorbing the energy from the interfering electromagnetic waves, which is then converted into heat. This process is known as EMI suppression, and it helps to ensure the circuit operates as intended without any performance issues.

The PMC0805-102 also works to reduce other forms of noise in an electronic circuit. For example, it can reduce power-supply noise, spike noise, and it can also help to reduce the propagation of high-frequency noise in a circuit. This allows the circuit to operate more reliably, without any unexpected performance issues.

In addition, the PMC0805-102 can also be used as a current sensing device. This means it can be used to measure small currents in a circuit, allowing for the circuit to be monitored and controlled more accurately. This can help to prevent any unwanted performance issues, or to help manage the power consumption of the circuit more effectively.

In conclusion, the PMC0805-102 is a type of ferrite bead and chip that is composed of a nickel-zinc ferrite core and an epoxy resin encapsulation. It is widely used in the electronics industry, and can be used for applications such as EMI suppression, current sensing, and reduction of power-supply and spike noise. The chip has a very low ESR, and its small size allows it to be used in a variety of applications.

The specific data is subject to PDF, and the above content is for reference