PMC0805-151

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite Beads and Chips are widely used components in electronic circuits, due to their low cost and high reliability. PMC0805-151 is a type of Ferrite Beads and Chips, which is used for EMI/RFI filtering in electronic circuits. This component provides an integrated solution for EMI/RFI filtering by combining high impedance and low frequency rejection properties.

PMC0805-151 takes the form of a standard 0805 package, which is a small chip size of 8 × 5 mm, featuring a mix of small size and operation effectiveness. This type of ferrite beads and chips can handle power ranging from 7.3W to 11.3W at frequencies up to 1GHz. Its impedance ranges from 180Ω to 1kΩ at1GHz and its inductance is approximately 2.4μH.

In terms of application field, PMC0805-151 is mainly used on mobile phone base stations, satellite onboard systems, and digital terrestrial television broadcasts, as well as wired communication devices, modems, and digital video products. This is because the ferrite beads and chips can effectively reduce noise interference and prevent information leakage. Furthermore, PMC0805-151 is also used in consumer electronics like radio receivers, game consoles, and computers.

The working principle of PMC0805-151 is based on the Faraday effect, where an external electromagnetic field can change or induce current in a conductor. PMC0805-151 ferrite beads and chips are mainly composed of iron oxide or ferrite, an electrically conductive material that can be magnetized by an external magnetic field. This material has a very high impedance, which helps to stop high-frequency electromagnetic noise and protect sensitive circuits.

The construction of this type of ferrite bead and chip consists of a cylindrical carrier with a central drill in the middle. The core of this component consists of a coil of magnetically-conductive material with a high magnetic permeability. This type of ferrite bead and chip is inserted in the circuit in order to stop high-frequency noise and suppress conducted EMI/RFI interference.

When a high-frequency signal passes through a PMC0805-151 ferrite bead and chip, the material\'s magnetic permeability induces a voltage in the windings created by the high-frequency signal. This voltage generated is out of phase with the incoming signal and the total voltage is shifted and then amplified, allowing the signal to be filtered within the defined frequency range. The signal can also be attenuated in the higher frequencies and the desired output is obtained.

PMC0805-151 is a type of ferrite beads and chips with high reliability, mainly used in electronic circuits such as mobile phones and consumer electronics. It is created by combining high impedance with low frequency filtering properties, and its inductance and impedance are adjustable. It is a great choice for those looking for an integrated EMI/RFI filtering solution for their electronic circuits.

The specific data is subject to PDF, and the above content is for reference