PMEG4010CPASX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PMEG4010CPASX is a four-phase rectifier array from Infineon Technologies providing a MOSFET-based solution for switched-mode power supplies, voltage regulators, and electronic ballasts. The array has a wide input voltage range of up to 600V and a fast recovery time of only 35ns. The PMEG4010CPASX is designed with two integrated four-phase rectifier arrays and eight power MOSFETs, which combine together to reduce footprint and enhance switching performance. In addition, the device integrates built-in Varistor for ESD protection and offers integrated protection against over-temperature.

The PMEG4010CPASX rectifier array includes four rectifying MOSFETs, each of which is composed of an N-channel MOSFET connected to a diode in parallel. The rectifying MOSFETs are connected in series with their drains connected to the positive supply, while their sources are connected to the negative supply. The rectifying MOSFETs alternately switch on and off, allowing current to flow in either direction through the array.

The PMEG4010CPASX rectifier array has two main applications: direct current-to-direct current (DC-DC) conversion and in power electronics, such as switching mode power supplies and voltage regulators. These applications typically require a certain amount of input power to regulate the output. The PMEG4010CPASX rectifier array can convert AC voltage to a manageable DC voltage, allowing it to be used for these purposes.

The PMEG4010CPASX rectifier array works by converting the AC voltage to a DC voltage. This is done by alternately switching the rectifying MOSFETs on and off. As each of the MOSFETs switches on, it effectively prevents current from flowing in the opposite direction, allowing the current to flow in the direction it is required. This process is repeated for each MOSFET in the array, resulting in the DC voltage output.

The PMEG4010CPASX rectifier array has a wide voltage range, allowing it to be used in a variety of applications. It is capable of converting AC input voltages of up to 600V and is capable of delivering output voltages of up to 200V. In addition, it has a fast recovery time of 35ns, allowing it to switch rapidly between its two cycles. The array also features an integrated Varistor for ESD protection and over-temperature protection, allowing it to be used in a broad range of applications.

The PMEG4010CPASX rectifier array is an ideal solution for a variety of power electronics applications. It is capable of converting AC voltages of up to 600V to a DC voltage, allowing it to be used in switching mode power supplies and voltage regulators. In addition, it offers protection against over-temperature and ESD and has a fast recovery time of 35ns, making it well-suited for high-frequency applications.

The specific data is subject to PDF, and the above content is for reference