PMT835004

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube Arresters (GDT) are essential components in electrical systems used to protect equipment against overvoltage damage. The PMT835004 is a GDT specifically designed for energy systems, and its design gives it a range of useful applications. This article will discuss the application field and working principle of the PMT835004.

Application Field

The PMT835004 is primarily used in energy systems, such as wind power, hydropower, gasoline, photovoltaic, citric acid, fermentation waste, and similar applications. It is designed to protect associated equipment such as transformers, motors, and generators from lightning strikes and other surges of electricity. By absorbing or diverting the high-voltage current, it prevents damage to equipment. It is designed to work at a maximum voltage of 8.5kV and can handle currents up to 4kA.
The PMT835004 is also often used as a transient voltage suppressor in fault current limiters to protect sensitive electronic equipment from power surges. It is often installed near power generation or distribution points, such as the point of common coupling, to act as a first line of defense against surges. This allows the equipment downstream to be protected from even the most severe voltage surges.

Working Principle

Gas Discharge Tubes (GDTs) work by utilizing a high-speed, gas-filled tube to absorb or divert high-voltage surges. This is a form of passive electronic surge protection, as no energy is used to operate the device. When a surge is sensed, an ionization process takes place in the gas-filled tube. This causes a spark or arc to form in the tube, which breaks down the molecules of the gas until the voltage drops below a certain level, at which point the arc is extinguished. This process allows the GDT to absorb higher voltages than other types of surge protectors. The PMT835004 has been specifically designed to withstand higher currents and voltages than comparable GDTs and is therefore more reliable.

In addition to its surge protection capabilities, the PMT835004 can also function as a voltage regulator. By manipulating the gas pressure in the tube, it is possible to control the voltage entering the device. This allows the PMT835004 to be used in applications where varying levels of voltage protection are required. This feature makes the PMT835004 an ideal addition to applications such as wind power and hydropower, where the levels of electricity may vary over time.

Conclusion

The PMT835004 is an ideal Gas Discharge Tube (GDT) for energy systems such as wind power, hydropower, gasoline, photovoltaic, citric acid, fermentation waste, and other similar applications. It is designed to protect equipment from voltage surges and is capable of handling currents up to 4kA and voltages up to 8.5kV. It can also be used as a voltage regulator due to its ability to control the pressure of gas in the tube. By employing the PMT835004, electrical systems can better protect equipment from voltage surges and keep them running smoothly.

The specific data is subject to PDF, and the above content is for reference