PT7A7533WE

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Simple Reset/Power-On Reset
Number of Voltages Monitored:	1
Output:	Push-Pull, Totem Pole
Reset:	Active High/Active Low
Reset Timeout:	160 ms Minimum
Voltage - Threshold:	3.08V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	8-SOIC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PT7A7533WE Application Field and Working PrinciplePMIC (Power Management Integrated Circuit) - Supervisors are a type of integrated circuits that are designed to make power management tasks easier. PT7A7533WE is a two-cell 3.3V voltage supervisor circuit with early warning levels and ±2% accuracy that can be used in a variety of applications.ApplicationsPT7A7533WE is commonly used to detect power supply problems such as overvoltage, undervoltage, and overcurrent. This type of power management IC can be used in automotive and communications applications, such as battery management systems, laptops, base stations, and UPS systems. It can be used to detect power supply problems in power supplies and offers precise accuracy levels of ±2%.In addition, PT7A7533WE has low power consumption, wide current range, and short response time, making it suitable for modern battery management systems. It can detect voltage levels over a wide range of values and protect against out-of-range conditions.Working PrinciplePT7A7533WE works by monitoring two primary voltages, an input voltage (VIN) and a power supply voltage (VCC). The two voltages are connected to different pins (IN and BP/CVCC respectively) on the IC. The two components are also connected to a threshold or reference voltage pin (REF). A voltage supervisor circuit compares the two inputs to the reference voltage, and it then produces an output signal indicating whether the inputs are within the acceptable range or not.If the voltage at either the VIN or VCC pin is lower than the reference voltage, the output of the supervisor will indicate an undervoltage condition. If the input voltage is higher than the reference voltage, an overvoltage condition is indicated. If the voltage at both inputs is greater than the reference voltage, it indicates an overcurrent condition.When an undervoltage or overvoltage condition is detected, the supervisor will generate an alert signal. This alert signal can be used to warn of an impending power problem or to initiate automatic power shutdown procedures.The accuracy of the PT7A7533WE is ±2%, making it ideal for applications which require precise accuracy. The supervisor also has a response time of less than 100μs, making it suitable for use in high-speed systems, such as automotive and communications.ConclusionPT7A7533WE is a versatile two-cell 3.3V voltage supervisor that can be used in a variety of applications, including automotive and communications applications. It has low power consumption, wide current range, and short response time, making it suitable for modern battery management systems. The accuracy of the supervisor is ±2%, while the response time is less than 100μs, making it suitable for high-speed systems. The PT7A7533WE also supplies an alert signal when an undervoltage or overvoltage condition is detected, facilitating a prompt response to power problems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description