PZT2907A,135

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PZT2907A, 135 is a type of bipolar junction transistor (BJT). A BJT is a three-terminal device consisting of two p-n junctions, with one being between the base and collector region and the other between the base and emitter region. This type of transistor is used for amplification and switching in various applications. The PZT2907A,135 is a NPN-types single BJT, manufactured by Philips electronics in the form of a small, low-power package. It has a voltage rating of 45V, a collector-base voltage of 40V, a collector-emitter voltage of 30V, a base-emitter saturation voltage of 1.2V, and a gain of 135. The PZT2907A,135 is a general-purpose BJT which can be used in a range of applications, such as amplifying signals, providing bias circuits, driving logic gates, and switching on and off power to other components. This device is particularly suitable for low-power applications where the current and voltage requirements are not overly demanding. Due to its wide range of uses, the PZT2907A,135 is often found in consumer electronics, power converters, linear circuit design, and radio-frequency applications. It is often paired with a low-power MOSFET to form an efficient driver/switcher circuit. The principle behind the operation of the PZT2907A,135 is simple and elegant. The base-collector junction of the BJT acts as a diode, meaning that when the potential difference between the two terminals is positive, current flows from the collector to the base. When the potential difference between the two terminals is negative, the diode is reverse-biased and the electric current is cut off. The base-emitter junction of the BJT is also used as a diode, but with the reverse action. When the potential difference between the two terminals is positive, current is cut off. When the potential difference between the two terminals is negative, electric current flows from the emitter to the base.The flow of charge carriers in the PZT2907A,135 is controllable and current amplification is achieved by controlling the base-emitter voltage. When this voltage is increased to a certain level, the device enters cutoff mode and no current flows from the collector to the emitter. When the base-emitter voltage is reduced, the device enters the active mode and starts to amplify the electric current provided on the collector. This voltage is generally supplied to the base by an external source and is thus known as the control voltage.In Summary, the PZT2907A,135 is a general-purpose BJT used in a wide variety of applications such as amplifying signals, providing bias circuits, and switching power to other components. Its working principle is based on the controllable flow of charge carriers in the device and its current amplification is achieved by controlling the base-emitter voltage.

The specific data is subject to PDF, and the above content is for reference