PZT2907A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PZT2907A, also known as 2N2907A, is a small signal,npn, general-purpose transistor. Different from others, PZT2907A has a plastic enclosure, and its size is around 3 x 1.5mm, the maximum power is 500mW which makes it perfect to design, test and operate within a low power system.

PZT2907A being of npn type consists of two n-type and one p-type semiconductor materials. The two n-type materials form the Collector and the Emitter while the p-type forms the Base. As it is a BJT (Bipolar Junction Transistor) single type, it has the following pin configuration; Base, Collector, and Emitter.

As the device is tiny, it weighs less than 0.1g, requiring a low forward current for it to work effectively. As mentioned previously the maximum power which it can handle is 500mW, one can check this with it’s mentioned maximum supply voltage (Vce) of 30V and its maximum collector current of 500mA.

PZT2907A can be used as an amplifier, as current flows from theEmitter to the Collector. It is suitable as an audio amplifier, and when used this way, the Base is fed with the input voltage while the Base is the output voltage. As the collector current is almost proportional to Base voltage, the device artificially amplifies the input current and the output voltage gain. When it is used as an amplifier, one can expect innovation in the musical sound as well as the amplification power.

The main application of PZT2907A is in amplifier circuits. It can also be used in mixer circuits, oscillator circuits, and Darlington pairs. It won’t be wrong to consider it as a perfect device to shape and create enhanced music to get an improved sound than regular amplifiers.

The input impedance of PZT2907A is usually about 50 to 500kiloohms, which is good and allows it to be connected with preamplifiers which don’t need too much input bias current. Usually, the bandwith of 2N2907A is around 200Mhz, making it best for RF amplifying application.

Another application of PZT2907A is its usage as a switch. It can be used in most of the switching applications with the unique option of on-off latching, which helps to conserve the energy by keeping the circuit in specific state which requires the least energy. Also, it can be used to couple with other transistors to form an integrated circuit.

Moreover, the PZT2907A can be used as level detectors and voltage regulators. By using a pair of PZT2907A they can be used as a voltage switched regulator circuit. Due to its unique design, it offers an improved linearity, safeguarding its life energy and due to its higher current, it ensures the same performance in high current applications.

So, the applications of PZT2907A are huge. Despite its small size, it offers high power and performance which makes it a perfect choice for most applications. It can be used for small signal switching purposes and amplify applications.

The specific data is subject to PDF, and the above content is for reference