Q2004F32

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are solid-state semiconductor devices that can be used to control large amounts of electric current. The popular triode for alternating current (TRIAC), also known as Q2004F32, is a type of thyristor. This article will discuss the application field and working principle of Q2004F32.

The main application of the Q2004F32 is low-voltage AC switches, such as those used in lighting controls, motor speed control, and radio frequency (RF) signal control. The device is also used in more complex applications, such as power supplies, motor drives and power factor correction, because it can block current flow in both directions. The Q2004F32 is suitable for various low power and medium power applications, and is often used as a replacement for mechanical switches due to its long life and noiseless operation.

Q2004F32 is a three-terminal device, and has three states. The main operation state is the off state (non-conducting), which is the state when no current is passing through the device. The other two states are on and latch. The device turns on when a minimum firing current passes through its main terminal, and remains in the on state until the current drops down below the holding current. The latch state is just the opposite; the device remains in the on state even if the gate current circuit is cut off.

The working principle of Q2004F32 can be described as follows: when a voltage is applied to its main terminal, the device increases its electric field until the on state is reached, at which point the current starts to flow. The electric field also increases until the latch state is reached, and the device remains in the on state even when the voltage is removed. The device can also be switched off by briefly applying a negative electric field to its main terminal. This field reverses the device current and turns off the device.

To summarize, Q2004F32 is an AC switch that can be used to control low-voltage AC applications, such as lighting controls and motor speed control. The device has three states: off, on and latch, and is operated by applying a voltage to its main terminal. The device increases its electric field until the on state is reached and the current starts to flow. Q2004F32 can also be switched off by applying a negative electric field to its main terminal. It is a reliable and long lasting device, and has found widespread application in various low power and medium power applications.

The specific data is subject to PDF, and the above content is for reference