Q4010LTTP

Series:	--
Packaging:	Tube
Part Status:	Active
Triac Type:	Internally Triggered
Voltage - Off State:	400V
Current - On State (It (RMS)) (Max):	10A
Current - Non Rep. Surge 50, 60Hz (Itsm):	100A, 120A
Current - Hold (Ih) (Max):	60mA
Configuration:	Single
Operating Temperature:	-40°C ~ 125°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-220-3 Isolated Tab
Supplier Device Package:	TO-220AB-L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs

A TRIAC (Triode for Alternating Current) is an electronic semiconductor switch consisting of three terminals, which is used in the control of alternating current (AC). TRIACs are bidirectional, meaning that the current can flow through it in both directions, making them useful in AC devices such as motors, dimmers, and light bulbs. Q4010LTTP is a member of the TRIAC family and is primarily used as a switching device in applications such as AC motor speed control, lamp control, and lighting.

Q4010LTTP Application Field

Q4010LTTP is a high-power application device and can be found in various AC control applications that require low to medium voltage, such as AC motor speed control and lighting. It is also suitable for AC motor speed control, lighting and AC lighting dimming applications.

Q4010LTTP Working Principle

Q4010LTTP is a special kind of TRIAC, which is a semi-conductive device. It utilizes reverse biased diodes and a gate terminal to control the flow of current. In order for the TRIAC to switch on, a gate current is supplied, which then immediately triggers the reverse biased diode, thus allowing current to flow through the device. The current then flows through until it is switched off by a control signal, at which point the diode is disabled, and the current stops flowing.The working principle of the Q4010LTTP can be compared to that of a traditional electromagnetic switch, which requires a physical contactor to initiate the current flow. Unlike the contactor, however, the Q4010LTTP utilizes an internal semiconductor design which eliminates the need for a physical contactor, making it faster and more reliable, as well as smaller and more efficient.

Q4010LTTP Characteristics

The maximum current rating of the Q4010LTTP is 630A, which is well suited for medium to high power AC applications. The switching speed of the device is also impressive, with a maximum turn-on time of 20 microseconds, and a maximum turn-off time of 15 microseconds. Q4010LTTP also features an integrated over voltage protection and a very low leakage current of only 1μA, when at an operating temperature of 25℃.

Conclusion

The Q4010LTTP is a dual-mode semiconductor switch specifically designed for medium to high power applications. This device features a high current rating, fast switching speed, integrated over voltage protection and a low leakage current, making it an excellent choice for AC motors and lighting applications. Therefore, the Q4010LTTP is highly suitable for AC motor speed control, lamp control, and lighting applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description