Q4010N5RP Discrete Semiconductor Products

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Triac Type:	Standard
Voltage - Off State:	400V
Current - On State (It (RMS)) (Max):	10A
Voltage - Gate Trigger (Vgt) (Max):	1.3V
Current - Non Rep. Surge 50, 60Hz (Itsm):	100A, 120A
Current - Gate Trigger (Igt) (Max):	50mA
Current - Hold (Ih) (Max):	50mA
Configuration:	Single
Operating Temperature:	-40°C ~ 125°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	TO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Supplier Device Package:	TO-263 (D2Pak)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACsIntroductionThyristors are a type of semiconductor device that has three terminals. These devices can be used to control the flow of current in an electrical circuit, and are often used to create circuits that require alternating current. They are also referred to as "TRIACs", which stands for "Triode for Alternating Current". The term "TRIAC" is also used to describe a device that has three terminals, however, they are usually configured in different ways than a thyristor.ApplicationsThe Q4010N5RP is an "enhancement-mode" TRIAC, meaning that it turns on when a voltage of positive or negative polarity is applied across its gate terminal. This particular device is designed to control the current in circuits that operate on alternating current. It is often used in applications such as rectification (the conversion of AC to DC), AC motor speed control, dimmer controls, and other similar or related circuits.Working PrincipleThe Q4010N5RP is an enhancement-mode TRIAC, meaning that it will turn on when a voltage of either positive or negative polarity is applied to its gate terminal. As the gate voltage is increased, more current will start to flow through the TRIAC, until it reaches its rated value. The voltage at the gate terminal can be much lower than the voltage at the other two terminals, which prevents the flow of current through the device until it is ready to be turned on.When the TRIAC is turned on, the current will continue to flow until the device reaches the end of its on-state voltage cycle (the peak value). This will cause the device to "latch" - meaning that the current will remain at or close to the same value until it is purposely shut off or the voltage cycle returns to zero.Once the voltage cycle reaches zero, the TRIAC will be in its off-state. The current will then be interrupted and the device will return to its original state, ready to be turned on again.ConclusionThe Q4010N5RP can be an effective device for controlling current in circuits with AC current. It has an enhancement-mode configuration, meaning that it turns on when either a positive or negative voltage is applied to its gate terminal. When it is turned on, the current will continue until the device reaches the end of its on-state voltage cycle. The device will then latch until the voltage cycle returns to zero, and the current will be interrupted until the device is ready to be turned on again.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description