Q6006LH3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The thyristor is the most important member of a family of solid-state switching devices. It is extensively used in power electronics applications. Thyristors are constructed from four or five layers of alternating P and N type semiconductor materials and can act as a switch, controlling the flow of current between two nodes. A TRIAC is a three-terminal thyristor that consists of three alternating P and N type layers of semiconductor material. The Q6006LH3 belongs to this class of semiconductor components.

The Q6006LH3 is a fast-switching TRIAC capable of controlling large currents, up to 6A with a very short-on time. It is designed for applications in power control such as dimming/regulation of residential and commercial lighting, as well as motor speed control. The device is constructed with an internal gate that is fully isolated from the main terminals. This ensures high immunity to interference and can allow multiple TRIACs to be driven in parallel with no problem.

The working principle of the Q6006LH3 can be understood through its bidirectional gate characteristics. When the gate voltage is a positive voltage above the trigger voltage (VBO), the main current starts to flow and the device enters its full conduction state. If the gate voltage is negative, then the main current shuts off and the device enters a blocking state. This allows the TRIAC to be used to control the flow of current by changing the applied gate voltage.

By switching on and off the switch on the main terminals, the current controlled by the Q6006LH3 can be divided into several phases. This phase control capability is widely used in dimming applications, such as those found in lighting, where the TRIAC is used to regulate the intensity of the lights, as well as motor speed control, where the TRIAC is used to vary the speed of the motor.

The Q6006LH3 can also be used in AC circuits. Its ability to support reverse blocking makes it suitable for use in over-voltage protection circuits. The TRIAC can be used to open the circuit if the voltage on the main terminals exceeds a certain threshold. Additionally, the device can also be used as a phase shifter, as it is able to switch off and on during several points in the AC cycle.

In summary, the Q6006LH3 is a fast-switching TRIAC with a bidirectional gate that allows it to switch the currents in both directions. It is mainly used in applications in power control, such as dimming/regulation of residential and commercial lighting and motor speed control. It can also be used in AC circuits to provide over-voltage protection and as a phase shifter.

The specific data is subject to PDF, and the above content is for reference