QS4A110QG8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

QS4A110QG8 is an interface component, specifically categorised as an analog switch, multiplexer, or demultiplexer. This component is produced by Nichicon and is best known for its exceptional interface performance.

An analog switch is essentially a device that helps control the flow of an analog signal. They come in different configurations, depending on the application being used. Multiplexers and demultiplexers are also interface components which connect two or more signals to one line. The multiplexer sends data in one direction while the demultiplexer sends data in the opposite direction.

The QS4A110QG8 is a single-pole double-throw (SPDT) analog switch. It features incredibly low on-resistance of 0.3Ω and is ideal for signal switching in RF and wireless applications. This switch has an operating voltage range of 2.0 to 5.5 V and a variation of six on-resistance from 0.30Ω to 0.41Ω, depending on the voltage level of the device. It is designed to operate over a temperature range of -55 to +125 degrees centigrade.

The QS4A110QG8 has two analog signal inputs A and B, two digital control inputs S1 and S2, and one output. The S1 and S2 inputs are used to select which signal is sent to the output. The S1 and S2 inputs can be operated as either as two single-pole single-throw (SPST) switches or one single-pole double-throw (SPDT) switch.

When the QS4A110QG8 is operated as SPST switches, S1 is used to select either A or B as the output. S2 is then used to set the output high or low. When operated as a SPDT switch, S1 and S2 together are used to select either A or B as the output.

The QS4A110QG8 also features a power-on reset when the VDD supply voltage is removed. This keeps the switch off until the power supply is restored. It also has an isolation voltage rating of 100 Volts which helps protect system circuits from being damaged by electrical overstress.

The QS4A110QG8 is a versatile component that can be used in a number of different applications ranging from communication equipment to industrial control systems. It can be used in RF signal switching applications in wireless network systems such as GSM, WiMAX and LTE. In industrial control systems, it can be used to switch analog signals in process control, motor control, and industrial automation systems.

The QS4A110QG8 is an ideal component to use in any application that requires analog signal switching. Its low off-state resistance, low power consumption, and wide operating temperature range make it well suited for signal switching over a wide range of applications.

The specific data is subject to PDF, and the above content is for reference