R7010605XXUA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Single

The R7010605XXUA is a single-phase bridge rectifier device, which is widely used in AC to DC power supplies. It is designed to convert alternating current (AC) input into direct current (DC) output. This bridge rectifier consists of four semiconductor diodes that are connected in a bridge configuration, resulting in a full-wave rectified output which can be used for low voltage applications up to 600V.

Application Field

The R7010605XXUA is commonly used in industrial, commercial and residential low voltage applications, such as rectifying voltage from household appliances, electric power tools, battery chargers and electric toys. It can also be used in UPS (uninterruptible power supply) systems, and in automotive, marine and renewable energy applications. Due to its high peak reverse voltage (600V), it is capable of operating in more extreme environments, and it is suitable for applications that require rectified AC to DC power.

Working Principle

The R7010605XXUA works by allowing alternating current (AC) input to alternate and flow through the diodes in the bridge in opposite directions. During the positive and negative cycles of the input signal, current can be seen flowing through the diode in either direction, result in a full-wave rectified output. The peak reverse voltage (600V) of the diodes allow them to block the current in the opposite direction, resulting in the DC output voltage. The working principle of this bridge rectifier is based on the design of a full wave bridge rectifier circuit.

The bridge rectifier output capacitance is typically lower than the efficiency can be achieved by other diode rectifier schemes, and it is also more resistant to voltage drops and fluctuations in the AC input. The R7010605XXUA produces a rectified and filtered three-phase current waveform which is suitable for all voltage conversion applications.

Conclusion

The R7010605XXUA bridge rectifier is a reliable and effective single-phase AC to DC power conversion solution for applications that require low voltage and up to 600V. Due to its four semiconductor diode configuration and peak reverse voltage, it produces a full-wave rectified output with higher efficiency and less resistance to drops in the AC input. This makes the R7010605XXUA a suitable device for industrial, commercial and residential applications.

The specific data is subject to PDF, and the above content is for reference