R7011004XXUA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The R7011004XXUA rectifier diode is a single-phase device designed to effectively transfer alternating current (AC) power to direct current (DC) power. This type of diode is also known as a synchrodiode because it takes advantage of the synchronous switching properties of silicon-controlled rectifiers (SCRs) and thyristors. It is commonly used in power supplies, variable speed drives, and in switching applications where the phase angle of the input waveform needs to be precisely controlled.

The R7011004XXUA is a reverse-biased diode, meaning that its anode (positive side) is connected to the power source and its cathode (negative side) to the load. When the diode is conducting, current will flow from the anode to the cathode, allowing current to reach the load. The diode’s reverse-biased nature means that current flow is limited by the amount of the voltage drop across the diode. When the voltage across the diode is too large, the diode breaks down and current stops flowing.

The R7011004XXUA has a breakdown voltage of 100V, meaning that a voltage of 100V or higher must be present to cause the diode to start conducting. The diode is rated for a forward current of up to 1A and a reverse current of up to 3A. When applied across an AC power supply, the R7011004XXUA acts like an ideal diode and prevents current flow in the reversed direction. The diode\'s low forward voltage drop and fast switching times make it ideal for switching AC signals with short and frequent rise times.

The anode-cathode of the R7011004XXUA is normally open, while the gate is connected to the anode. When the gate receives a positive signal, which can be generated by a diode or step-up transformer, the diode turns on, allowing current to flow in the forward direction. Conversely, when the gate receives a negative signal, the diode is turned off and no current passes. This makes the R7011004XXUA ideal for applications such as motor and lighting control, where the phase angle of the input waveform needs to be precisely controlled.

As with any electronic component, there are certain precautions that need to be taken when handling the R7011004XXUA. For example, the diode should be kept away from wet or corrosive environments and the physical stress of vibration and mechanical shock should be avoided. Additionally, the diode must be handled with caution, as it contains sensitive and often fragile components. When handling the diode, care should be taken to avoid electrostatic discharge.

The R7011004XXUA is a cost-effective and versatile rectifier diode that can be used in a variety of AC-to-DC power conversion and switching applications. Its ability to control the phase angle of the input waveform makes it an ideal solution for motor and lighting control applications. It is important, however, to ensure that these components are handled with the necessary safety precautions.

The specific data is subject to PDF, and the above content is for reference