R7012004XXUA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The R7012004XXUA diode bridge rectifier is a single-phase rectifier used to convert AC current to DC current. It is a crucial component in a variety of power supply, welding, and engine starter applications. The R7012004XXUA can withstand voltage and current levels of up to 1000V and 16A.

Function

The R7012004XXUA diode bridge rectifier is designed to provide continuous and reliable operation in applications such as off-grid solar charging systems, welding equipment, and engine starters. It is also used to convert AC current to DC current for use of efficient motor control or for storing energy in a capacitor. The rectifier requires a higher voltage and lower current compared to a resistor rectifier.

Design

The R7012004XXUA diode bridge rectifier is a four-terminal component and has four diodes connected in a bridge formation. The two input terminals are connected to the AC source, while the two output terminals are connected to the device which requires DC current. The R7012004XXUA is designed with a peak reverse voltage of 1,000V and a peak repetitive reverse voltage of 800V. The maximum forward surge current is 80A.

Operation

When the AC voltage is supplied to the two input terminals, current will flow in the bridge circuit in both directions. During the positive half cycle of AC voltage, the current will flow through diodes 1 and 3 while the voltage will drop across the diodes. During the negative half cycle of AC voltage, the current will flow through diodes 2 and 4 while the voltage will also drop across the diodes. This allows the R7012004XXUA to convert AC to DC current.

Advantages

The R7012004XXUA diode bridge rectifier provides several advantages to its users. Firstly, it is a very efficient device as it has a low forward voltage drop across the diode. It is also a cost-effective option as it is relatively inexpensive compared to other components. Furthermore, it is also relatively small and lightweight, making it ideal for use in applications where space is limited.

Conclusion

The R7012004XXUA diode bridge rectifier is a single-phase rectifier used to convert AC current to DC current. It is designed with a peak reverse voltage of 1,000V and a peak repetitive reverse voltage of 800V. The bridge rectifier is used in a variety of power supply, welding, and engine starter applications. It is designed with a low forward voltage drop and is cost-effective and small and lightweight. As a result, it is an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference