RS2G-M3/52T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are one of the most common components in electrical circuits. They can be used to rectify AC power or act as switches or gateways in logic circuits. Single phase rectifiers are the simplest form of rectifier, and the RS2G-M3/52T is a single phase rectifier device. With its low leakage current and low forward voltage drop, the RS2G-M3/52T is a reliable and compact solution for a variety of applications.The RS2G-M3/52T is a Single Phase Bridge Rectifier with a total average output current of 3.0A and a Peak Repetitive Reverse Voltage (Vrrm) of 52V. It is composed of four separate diodes wired into a bridge configuration, which can be used to convert AC power from one source into DC power. The bridge rectifier is a popular component for linear and switch-mode power supply (SMPS) systems.The RS2G-M3/52T is constructed of high-efficiency metal silicon junction (MSJ) diodes to ensure long component life, low forward voltage drop, and low leakage current. It is also rated to operate over a broad temperature range from -55°C to +125°C. The RS2G-M3/52T is designed to meet the requirements of IEC 60950-1 and RoHS 2.0 standards.This component is suitable for a wide array of applications including low-power DC/DC converters, general purpose AC/DC rectifiers, voltage multipliers, and snubber circuits. The RS2G-M3/52T can be used in various industries such as automotive, communication, power, industrial and consumer electronics. The basic working principle of a single-phase rectifier is to convert AC power from an external source into DC power. When an AC power source is connected to the input of the rectifier, a positive voltage is applied to one side of the bridge rectifier and a negative voltage is applied to the other side. As the AC voltage rises and falls, the diode connected to the negative side will allow current to flow in one direction, and the diode connected to the positive side will allow current to flow in the opposite direction. This alternating flow of current is necessary to ensure that the total current is always unidirectional and rectified DC power is produced at the output.The RS2G-M3/52T can significantly reduce the overall power loss compared to a full-wave center-tapped rectifier by eliminating the half wave that previously reduced the efficiency of the system. Additionally, it provides higher efficacy and more stable performance in applications that require stable DC outputs.Overall, the RS2G-M3/52T is a reliable, cost-effective single-phase rectifier which can be used in a variety of applications. Its small size and low leakage current make it a great choice for low power rectification. Furthermore, its wide operating temperature range and compliance with IEC 60950-1 and RoHS 2.0 standards make it suitable for applications in automotive, commercial, and industrial environments. Its simple wiring and efficient operation make it the perfect choice for a variety of applications requiring the conversion of AC power into DC power.

The specific data is subject to PDF, and the above content is for reference