RT7296EGJ8F Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RT7296EGJ8F is a highly efficient switching regulator designed for low voltage and current applications such as consumer electronics, office equipment, and energy-saving applications. It is a Power Management IC (PMIC) suitable for driving various kinds of DC/DC converters and Boost regulators. In particular, the RT7296EGJ8F has the characteristics of low voltage operation, low standby current and high efficiency, making it ideal for use in applications of low voltage and current level.

The RT7296EGJ8F is classified under the DC/DC Switching Regulator category of PMICs. This type of switching regulator uses a pulse width modulation (PWM) technique to control the conversion of DC voltage. In other words, it switches the input voltage on and off to produce an averaged voltage at its output. The average output voltage is regulated regardless of the input voltage. PWM regulators have the advantage of high efficiency because the switch is not turning on the entire power supply. In addition, the switching frequency is adjustable over a wide range, allowing for dynamic speed control. This makes the RT7296EGJ8F suitable for a wide range of applications.

The RT7296EGJ8F switches an input voltage of 6 V to 0.9 V with a typical efficiency of 90%. It features an adjustable switching frequency between 200 kHz to 2.2 MHz and a wide output voltage range of 1.2 V to 5.0 V. It is also equipped with fault protection features such as over-voltage protection, over-current protection, and output short-circuit protection. This makes the IC suitable for applications requiring high reliability.

The RT7296EGJ8F can be used in a wide range of applications, such as powering LED lighting, powering small motors, and portable electronics. It can also be used in power-saving applications, allowing for energy-efficient conversion of power from a higher source to a lower source, reducing the waste of energy. In addition, the adjustable frequency allows for dynamic speed control, making it ideal for powering small motors.

In terms of its working principle, the RT7296EGJ8F is controlled by an external Pulse Width Modulation (PWM) signal. The PWM signal is generated by a microcontroller and controls the switching of the power FETs. The PWM frequency can be adjusted from 200kHz to 2.2 MHz via an external resistor, while the output voltage is set via two external resistors. The IC includes a dead-time compensation circuit to reduce switching losses and a soft start circuit to reduce inrush current.

To sum up, the RT7296EGJ8F is a highly efficient switching regulator that is suitable for low voltage and current applications. It provides high reliability with its fault protection features, adjustable switching frequency and wide output voltage range. With its ability to efficiently convert power from higher voltages to lower ones, it is ideal for a wide range of applications such as LED lighting, small motors, and portable electronics. Additionally, its adjustable frequency and dead-time compensation circuit allows for dynamic speed control and reduced switching losses.

The specific data is subject to PDF, and the above content is for reference