S1GLHM2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are semiconductor devices used to control the flow of electric current between two points. Single-phase diodes are a type of diode typically used for AC applications, such as rectification. A single-phase diode, also known as an S1GLHM2G diode, is a diode that is capable of conducting current in one direction only, making it useful for applications such as AC to DC conversion, among many others. In this article, we’ll look at the application field and working principle of the S1GLHM2G diode.

Application Field

S1GLHM2G diodes are widely used for several different applications. The most common applications for this type of diode are AC to DC conversion, rectification, and surge current suppression. These diodes can also be used for power rectification, neutral grounding, and bypass circuits.

In AC to DC conversion, the S1GLHM2G diode is used to rectify the AC waveform, allowing DC current to flow in one direction only. The diode is connected in series with the AC load, which allows it to block current flow in the opposite direction. This helps to prevent electrical damage due to short circuits.

In rectification applications, the S1GLHM2G diode is used to convert AC voltage into a pulsating DC voltage, which can then be used to power devices that require DC current. This type of diode can also be used for neutral grounding applications, in which the AC waveform must be rectified to protect equipment from power surges and overcurrents.

In bypass circuits, the S1GLHM2G diode is used to effectively bypass the main current path, allowing the current to take an alternate route. This helps to prevent electrical damage due to overload and helps maintain the normal current level in the system.

Working Principle

The S1GLHM2G diode works by using a semiconductor material consisting of two sections, known as the anode and the cathode. The anode is the positive side and the cathode is the negative side of the diode. The anode is connected to the positive side of the power source and the cathode is connected to the load. When a voltage is applied across the anode and cathode, electrons flow from the anode to the cathode, creating an electric current.

When the applied voltage is in the positive direction, the diode becomes forward-biased and allows current to flow in the forward direction. This is known as the forward biasing of the diode, and it is the principle behind AC to DC conversion. When the applied voltage is reversed, the diode becomes reverse-biased and does not allow current to flow in the reverse direction. This is known as the reverse biasing of the diode, and it is the principle behind surge current suppression.

When the diode is used in an AC circuit, it uses the forward biasing and reverse biasing effects to control the flow of current. During the positive half-cycle of the AC wave, the diode is forward-biased and allows current to flow in the forward direction. During the negative half-cycle, the diode is reverse-biased and does not allow current to flow in the reverse direction.

This allows the diode to effectively convert AC voltage into pulsating DC voltage, which can then be used to power devices that require DC current. The S1GLHM2G diode is a valuable tool for many AC applications and can help to protect equipment from power surges, overcurrents, and other electrical hazards.

The specific data is subject to PDF, and the above content is for reference