Series:	Automotive, AEC-Q101
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	400V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 1A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Reverse Recovery Time (trr):	1.8µs
Current - Reverse Leakage @ Vr:	5µA @ 400V
Capacitance @ Vr, F:	9pF @ 4V, 1MHz
Mounting Type:	Surface Mount
Package / Case:	DO-219AB
Supplier Device Package:	Sub SMA
Operating Temperature - Junction:	-55°C ~ 175°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Single:

Introduction:

A single-phase full-wave rectifier is a circuit used for the conversion of alternating current (AC) to direct current (DC). It uses a single diode connected to an AC source in order to convert the AC signal into a DC signal. The single-phase full-wave rectifier has a variety of applications, including being used as a power supply in motor control circuits, signal conditioners, and power converters.

Types of Single-Phase Rectifiers:

Single-phase rectifiers come in two basic types: half-wave and full-wave. The full-wave rectifiers are further classified as center-tapped and bridge. Each type of rectifier has its own advantages and disadvantages. Half-wave rectifiers are the simplest form of rectifier. It uses a single diode connected to an AC source, usually a transformer, to produce a pulsed DC output. The DC output is of one polarity only and has a much lower voltage than the input voltage. Half-wave rectifiers are used to provide power to low-voltage circuits and to charge storage batteries.Full-wave rectifiers are more efficient than half-wave rectifiers and produce a more uniform DC output. The full-wave rectifiers can be center-tapped or bridge. A center-tapped rectifier has two diodes connected to the center tap of a transformer secondary winding, while a bridge rectifier has four diodes connected in a bridge configuration. Full-wave rectifiers are used to provide power to high-voltage circuits and for applications such as welding and starting motors.

S1GLHRUG Application Field and Working Principle:

The S1GLHRUG type rectifier is a high-performance full-wave rectifier designed for use in AC power systems. The S1GLHRUG is especially suited for applications such as motor control, signal conditioning, and power converters. It features high-reliability, low on-state voltage, and low leakage current. The S1GLHRUG is a full-wave bridge rectifier, which means it allows current to flow through it in both directions. It is made up of four high-speed, low-power diodes connected in a bridge configuration. Each diode is capable of conducting current for both the positive and negative half cycles of the input AC waveform. This bridge method of rectification allows current to flow in both directions at the same time, resulting in a full-wave output.The S1GLHRUG is designed to rectify AC voltages up to 600Vac and can provide up to 1.5A of output current. The rectifier has a snubber network to reduce RF interference, which makes it suitable for use in radio frequency circuits. The rectifier can also provide reverse current protection, meaning that the output voltage can be maintained even during abnormal conditions.

Conclusion:

The S1GLHRUG is a high-performance and reliable solid state full-wave bridge rectifier. It is suitable for a wide range of applications requiring AC/DC conversion such as motor control, signal conditioning, and power converters. The rectifier is capable of handling high voltages and currents and provides low on-state voltage and low leakage current. Additionally, the S1GLHRUG comes with an internal snubber network for reducing RF interference and can provide reverse current protection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description